4th Annual Australian Digital Dentistry Conference

Sydney, AUSTRALIA

THIS EVENT HAS CONCLUDED

THIS EVENT IS SOLD OUT

From: 8:30 AM Friday, 2 June, 2023

Registration opens at 7:30 AM

To: 5:00 PM Saturday, 3 June, 2023

TOTAL CPD AVAILABLE FOR THIS EVENT: 12 HOURS

12 CPD HOURS

The intended audience for this event includes:

SPECIAL OFFER: Register together with a friend or colleague and SAVE. The first person pays $880 and the second person on the same registration only pays $440. For a limited time only!



Join us in June 2023 in Sydney to hear an amazing line-up of speakers immersed in the world of digital dentistry from both the clinic and the laboratory.

Digital Dentistry & Dental Technology 2023 will again focus on connecting you with the expert knowledge you need to succeed in the digital world with presentations on solutions in everything from restorative dentistry and implantology to orthodontics, digital dentures and more, covering everything from intraoral scanning and 3D imaging, the latest in software, clinical diagnostics and chairside solutions, to the laboratory with 3D printing, milling, software and more.

Digital Dentistry & Dental Technology 2023 will again be presented by local and international experts who everyday work in the clinic and lab using the cutting edge solutions in the digital world to provide optimal solutions and optimal patient care.

The programme covers all aspects of digital dentistry including intraoral scanning, 3D printing, milling, CBCT, CAD/CAM, software and more, focussing on restorative dentistry, implantology, orthodontics and practically every element of clinical dentistry and laboratory work.

Please join us again in 2023 to connect with colleagues and hear the latest solutions in the realm of digital dentistry at this 2-day multi-stream, multi-speaker event.

View the programme from Digital Dentistry & Dental Technology 2022

Sponsors:

A discounted accommodation rate is available for Digital Dentistry & Dental Technology 2023. In order to take advantage of the discounted rate, please contact the hotel directly on (02) 9556-5111 and quote DEN020623. Rates and room types are subject to availability at the time of booking. You will need to provide a credit card upon booking.

The rates are:

  • Standard Residential View Room - $279.00 per room per night
  • Superior Botany Bayview Room - $309.00 per room per night
  • Superior Botany Bayview Suite - $339.00 per room per night

Rates are inclusive of one buffet breakfast in Baygarden Restaurant. Additional breakfasts will be charged on consumption with a discounted rate of $30.00 per person per day.

All
a c d e f h i k m o p r s w x

9.00 - 10.30 • Session 1

Aesthetic Zirconia: An Update

Zirconia presents a conservative, strong aesthetic option for patients, manufactured with digital CAD/CAM technology. How has the material changed and what are its physical properties?

Learn:

  • To distinguish between different generations of Zirconia;
  • How to cement Zirconia;
  • The type of preparation design required; and
  • The biocompatibility of the material.

Dr Andrea Shepperson will share a number of cases and discuss the selection of aesthetic zirconia compared with IPS e.max. She will provide an update on case selection and the material properties of this biocompatible material.

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 2

Achieving amazing results with new generation lithium disilicate glass ceramics

Award winning internationally recognized dental technician and KOL Cristian Petri will discuss and present the astonishing properties and qualities of new generation lithium disilicate glass ceramics.

Topics will include:

  • CAD/CAM workflows;
  • Aesthetic and predictable no-prep and minimum prep veneers;
  • New material presentation - Amber Mill Direct;
  • Finishing and glazing of Amber Mill and Amber Mill Direct;
  • Adhesive cementation; and
  • Tips and tricks on how to achieve outstanding results.

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 3

Facial Scanners in Dentistry - Why to buy one and how to utilise it for maximum ROI

Facial scanners are making a big impact in dentistry. First, it started with the Bellus iPhone app, but after that was discontinued, we now have several dental-specific facial scanners that have been launched. The question is WHY? Why should you even consider one? What is the point of these devices and how can you use them to improve case acceptance, reduce remakes of your restorations and make an excellent ROI on your investment? In this lecture, Dr Ahmad Al-Hassiny from the Institute of Digital Dentistry will cover all this and more. As a full-time practising dentist, he will explain how these devices can be used, showcasing the benefits and challenges through various clinical cases for both dentists and lab technicians.

14.15 - 15.00 • Session 4

Printing vs Milling - Addition vs Subtraction - Chairside implications for the Digital Dentist

With the rapid adoption of 3D printing globally in the dental industry, many have questioned whether milling is still a worthy investment in the long-term. This is especially pertinent, with longer-lasting restorative resins being developed and even ceramics being able to be printed these days. We will discuss the advantages and disadvantages of both additive and subtractive technologies in dental practice and bust some of the myths and hearsay along the way.

15.00 - 15.30 • Afternoon Tea

15.30 - 17.00 • Session 5

Achieving optimal digital aesthetic outcomes chairside

Clinical techniques and approaches for single unit and multi-unit cases covering digital design approaches, hands-on techniques and workflows that will create excellent clinical outcomes in an efficient and productive manner.

17.00 - 19.00 • Happy Hour Drinks

9.00 - 10.30 • Session 1

Aesthetic Zirconia: An Update

  • Lecture

Zirconia presents a conservative, strong aesthetic option for patients, manufactured with digital CAD/CAM technology. How has the material changed and what are its physical properties?

Learn:

  • To distinguish between different generations of Zirconia;
  • How to cement Zirconia;
  • The type of preparation design required; and
  • The biocompatibility of the material.

Dr Andrea Shepperson will share a number of cases and discuss the selection of aesthetic zirconia compared with IPS e.max. She will provide an update on case selection and the material properties of this biocompatible material.

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 2

Achieving amazing results with new generation lithium disilicate glass ceramics

  • Lecture

Award winning internationally recognized dental technician and KOL Cristian Petri will discuss and present the astonishing properties and qualities of new generation lithium disilicate glass ceramics.

Topics will include:

  • CAD/CAM workflows;
  • Aesthetic and predictable no-prep and minimum prep veneers;
  • New material presentation - Amber Mill Direct;
  • Finishing and glazing of Amber Mill and Amber Mill Direct;
  • Adhesive cementation; and
  • Tips and tricks on how to achieve outstanding results.

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 3

Facial Scanners in Dentistry - Why to buy one and how to utilise it for maximum ROI

  • Lecture

Facial scanners are making a big impact in dentistry. First, it started with the Bellus iPhone app, but after that was discontinued, we now have several dental-specific facial scanners that have been launched. The question is WHY? Why should you even consider one? What is the point of these devices and how can you use them to improve case acceptance, reduce remakes of your restorations and make an excellent ROI on your investment? In this lecture, Dr Ahmad Al-Hassiny from the Institute of Digital Dentistry will cover all this and more. As a full-time practising dentist, he will explain how these devices can be used, showcasing the benefits and challenges through various clinical cases for both dentists and lab technicians.

14.15 - 15.00 • Session 4

Printing vs Milling - Addition vs Subtraction - Chairside implications for the Digital Dentist

  • Lecture

With the rapid adoption of 3D printing globally in the dental industry, many have questioned whether milling is still a worthy investment in the long-term. This is especially pertinent, with longer-lasting restorative resins being developed and even ceramics being able to be printed these days. We will discuss the advantages and disadvantages of both additive and subtractive technologies in dental practice and bust some of the myths and hearsay along the way.

15.00 - 15.30 • Afternoon Tea

15.30 - 17.00 • Session 5

Achieving optimal digital aesthetic outcomes chairside

  • Lecture

Clinical techniques and approaches for single unit and multi-unit cases covering digital design approaches, hands-on techniques and workflows that will create excellent clinical outcomes in an efficient and productive manner.

17.00 - 19.00 • Happy Hour Drinks

9.00 - 10.30 • Session 1

Beyond single unit crowns; alternative uses for e.max CAD bridge blocks using chairside CAD/CAM

Having an unsurpassed track record in dentistry, e.max is the material of choice most CAD/CAM dentists prescribe, for almost all indications. From single unit crowns, aesthetic veneers, implant restorations and bridges.

This presentation expands on the indications for e.max in conservative management of edentulous spaces, using e.max bridge blocks and CAD/CAM technology. We will cover indications, CAD/CAM software management, bonding and longevity.

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 2

Perfect preps and milled margins - A strategy for excellence

The holy grail of dentistry is an undetectable crown margin.

For decades, gold crowns were regarded unanimously as the “gold standard” of dental restorations. They boasted the best fit, the most conservative and the most resilient of the crown materials. Milled glass ceramics were relegated to the other end of the quality spectrum. Considered by many to be the fragile, poorer fitting and unaesthetic cousin to cast dental ceramics.

Advances in dental materials, intraoral scanners and milling machines has turned the tables on old ideologies. Just like any powerful tool, they must be used in the correct manner in order to maximise their output.

This lecture will showcase Dr Lewis’ treatment protocols for perfect crown preparations, intraoral scans and milling of onlays and crowns to achieve restorative excellence that will be the envy of your peers!

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 3

Playing dental detective: Digital tools in diagnosis of tooth wear cases

Tooth wear is the third most common oral health issue after caries and periodontal disease. Our digital tools are helping to identify it early and distinguish between patterns of wear.

Learn how to:

  • Think like a diagnostician. Recognise tooth wear based on digital recognition.
  • Utilise the full capability of IOS for new patients.
  • Use digital functional and design tools to aid in planning.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 4

How changes in patient behaviour impact your plans to do more digital dentistry

Digital dentistry brings together cutting-edge technology for dentists and life-changing smile improvements for patients. Win-win right?

While dentists’ appetite for dentistry is at an all time high, that doesn’t mean that patients feel the same way about it.

Changes in patient behaviour mean that unfortunately, introducing digital dentistry to your practice is not a case of ‘build it and they will come’.

Fortunately, there is a solution and it’s within reach of dentists ready to embrace the opportunity.

Join Australia’s number one Google-ranked dental marketer, Angus Pryor, to discover:

  • The disconnect between dentist and patient views about digital dentistry and how to bridge the gap
  • The change in patient behaviour that requires an adjustment in how dentists promote their digital dentistry services
  • The 3 most common mistakes that dentists make promoting digital dentistry and how to avoid them
  • Why your website is acting more like a 10 foot wall and not an open door in your efforts to attract patients seeking digital dentistry
  • The two questions to ask patients that will have patients asking you for digital dentistry services without you having to sell a thing

16.15 - 17.00 • Session 5

  • ,
  • ,
  • ,

Forum - Digital Dentistry: The next 12 months

This 45-minute forum will discuss how the next 12 months is shaping up in the realm of digital dentistry and what to expect, with particular reference to new innovations shown at IDS 2023. Questions from the audience will be discussed by the panel of experts.

9.00 - 10.30 • Session 1

Beyond single unit crowns; alternative uses for e.max CAD bridge blocks using chairside CAD/CAM

  • Lecture

Having an unsurpassed track record in dentistry, e.max is the material of choice most CAD/CAM dentists prescribe, for almost all indications. From single unit crowns, aesthetic veneers, implant restorations and bridges.

This presentation expands on the indications for e.max in conservative management of edentulous spaces, using e.max bridge blocks and CAD/CAM technology. We will cover indications, CAD/CAM software management, bonding and longevity.

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 2

Perfect preps and milled margins - A strategy for excellence

  • Lecture

The holy grail of dentistry is an undetectable crown margin.

For decades, gold crowns were regarded unanimously as the “gold standard” of dental restorations. They boasted the best fit, the most conservative and the most resilient of the crown materials. Milled glass ceramics were relegated to the other end of the quality spectrum. Considered by many to be the fragile, poorer fitting and unaesthetic cousin to cast dental ceramics.

Advances in dental materials, intraoral scanners and milling machines has turned the tables on old ideologies. Just like any powerful tool, they must be used in the correct manner in order to maximise their output.

This lecture will showcase Dr Lewis’ treatment protocols for perfect crown preparations, intraoral scans and milling of onlays and crowns to achieve restorative excellence that will be the envy of your peers!

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 3

Playing dental detective: Digital tools in diagnosis of tooth wear cases

  • Lecture

Tooth wear is the third most common oral health issue after caries and periodontal disease. Our digital tools are helping to identify it early and distinguish between patterns of wear.

Learn how to:

  • Think like a diagnostician. Recognise tooth wear based on digital recognition.
  • Utilise the full capability of IOS for new patients.
  • Use digital functional and design tools to aid in planning.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 4

How changes in patient behaviour impact your plans to do more digital dentistry

  • Lecture

Digital dentistry brings together cutting-edge technology for dentists and life-changing smile improvements for patients. Win-win right?

While dentists’ appetite for dentistry is at an all time high, that doesn’t mean that patients feel the same way about it.

Changes in patient behaviour mean that unfortunately, introducing digital dentistry to your practice is not a case of ‘build it and they will come’.

Fortunately, there is a solution and it’s within reach of dentists ready to embrace the opportunity.

Join Australia’s number one Google-ranked dental marketer, Angus Pryor, to discover:

  • The disconnect between dentist and patient views about digital dentistry and how to bridge the gap
  • The change in patient behaviour that requires an adjustment in how dentists promote their digital dentistry services
  • The 3 most common mistakes that dentists make promoting digital dentistry and how to avoid them
  • Why your website is acting more like a 10 foot wall and not an open door in your efforts to attract patients seeking digital dentistry
  • The two questions to ask patients that will have patients asking you for digital dentistry services without you having to sell a thing

16.15 - 17.00 • Session 5

  • ,
  • ,
  • ,

Forum - Digital Dentistry: The next 12 months

  • Roundtable Discussion

This 45-minute forum will discuss how the next 12 months is shaping up in the realm of digital dentistry and what to expect, with particular reference to new innovations shown at IDS 2023. Questions from the audience will be discussed by the panel of experts.

9.00 - 10.30 • Session 1

Achieving amazing results with new generation lithium disilicate glass ceramics

Award winning internationally recognized dental technician and KOL Cristian Petri will discuss and present the astonishing properties and qualities of new generation lithium disilicate glass ceramics.

Topics will include:

  • Unique features of Amber Mill and the NEW Amber Direct materials;
  • Tips and tricks on how to achieve outstanding results;
  • No-prep and minimum prep veneers;
  • Monolithic and micro layering aesthetic restorations;
  • Milling parameters; and
  • Full digital approach workflow.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 2

How good is 3D printing?

3D printing is becoming ubiquitous in dentistry. Justin Elsey, chemical engineer and founder of ASIGA, will discuss how good current 3D printing technology is and what the practical limits are.

11.45 - 12.30 • Session 3

Why isn’t digital there yet?

There are many reasons why digital is not working or that we cannot solely rely on it during our manufacturing. Many problems need to be solved and today we will show you how to get past that.

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 4

The SPRINTRAY Universe - The complete chairside printing solution plus YOAT Bender II digital wire bending machine

SPRINTRAY universe

With an Industry leading printer portfolio to incredible materials, this presentation will touch on everything Sprintray has to offer... from a complete run down on all the equipment, new and existing resins plus the cloud design service Sprintray offers.

We will also touch on what is actually involved with printing. It’s vitally important to understand the post processing and the nitty gritty parts of finishing printed appliances.

We also introduce the new Sprintray Ceramic and OnX materials and how they are all the rage in the US.

YOAT Bender II

A complete introduction to this revolutionary wire bending machine, allowing you to bend a fixed lingual wire in less than 3 minutes. How the Bender II technology has been improved from the original unit will be discussed and a complete workflow demonstration shown.

We will discuss how the Bender II is being applied across labs and Orthodontic clinics in A/NZ.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 5

The Beginners Blueprint: A step-by-step guide to successful 3D printing in your business

Join Charlie for a session that will take you on a journey through the new world of 3D printing in the dental industry. This session is designed to guide beginners through the history, basic principles and applications of 3D printing for dentistry. We will explore how this technology can be used to create a whole range of dental models and replace the traditional methods highlighting its advantages such as cost-effectiveness, precision and efficiency. Despite the potential, Charlie will also address the challenges and limitations, providing a balanced view. Looking ahead, he will delve into future trends and the possibilities 3D printing holds for the industry. This engaging talk is a must for anyone eager to understand and embrace the advancements shaping the future of dentistry.

16.15 - 17.00 • Session 6

  • ,
  • ,
  • ,

FORUM: The future of 3D printing

This 45-minute forum will present a lively discussion on the future of 3D printing and what to expect, with a particular focus on all the new innovations released at IDS 2023. Questions from the audience will be discussed by the panel of experts.

17.00 - 19.00 • Happy Hour Drinks

9.00 - 10.30 • Session 1

Achieving amazing results with new generation lithium disilicate glass ceramics

  • Lecture

Award winning internationally recognized dental technician and KOL Cristian Petri will discuss and present the astonishing properties and qualities of new generation lithium disilicate glass ceramics.

Topics will include:

  • Unique features of Amber Mill and the NEW Amber Direct materials;
  • Tips and tricks on how to achieve outstanding results;
  • No-prep and minimum prep veneers;
  • Monolithic and micro layering aesthetic restorations;
  • Milling parameters; and
  • Full digital approach workflow.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 2

How good is 3D printing?

  • Lecture

3D printing is becoming ubiquitous in dentistry. Justin Elsey, chemical engineer and founder of ASIGA, will discuss how good current 3D printing technology is and what the practical limits are.

11.45 - 12.30 • Session 3

Why isn’t digital there yet?

  • Lecture

There are many reasons why digital is not working or that we cannot solely rely on it during our manufacturing. Many problems need to be solved and today we will show you how to get past that.

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 4

The SPRINTRAY Universe - The complete chairside printing solution plus YOAT Bender II digital wire bending machine

  • Lecture

SPRINTRAY universe

With an Industry leading printer portfolio to incredible materials, this presentation will touch on everything Sprintray has to offer... from a complete run down on all the equipment, new and existing resins plus the cloud design service Sprintray offers.

We will also touch on what is actually involved with printing. It’s vitally important to understand the post processing and the nitty gritty parts of finishing printed appliances.

We also introduce the new Sprintray Ceramic and OnX materials and how they are all the rage in the US.

YOAT Bender II

A complete introduction to this revolutionary wire bending machine, allowing you to bend a fixed lingual wire in less than 3 minutes. How the Bender II technology has been improved from the original unit will be discussed and a complete workflow demonstration shown.

We will discuss how the Bender II is being applied across labs and Orthodontic clinics in A/NZ.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 5

The Beginners Blueprint: A step-by-step guide to successful 3D printing in your business

  • Lecture

Join Charlie for a session that will take you on a journey through the new world of 3D printing in the dental industry. This session is designed to guide beginners through the history, basic principles and applications of 3D printing for dentistry. We will explore how this technology can be used to create a whole range of dental models and replace the traditional methods highlighting its advantages such as cost-effectiveness, precision and efficiency. Despite the potential, Charlie will also address the challenges and limitations, providing a balanced view. Looking ahead, he will delve into future trends and the possibilities 3D printing holds for the industry. This engaging talk is a must for anyone eager to understand and embrace the advancements shaping the future of dentistry.

16.15 - 17.00 • Session 6

  • ,
  • ,
  • ,

FORUM: The future of 3D printing

  • Lecture

This 45-minute forum will present a lively discussion on the future of 3D printing and what to expect, with a particular focus on all the new innovations released at IDS 2023. Questions from the audience will be discussed by the panel of experts.

17.00 - 19.00 • Happy Hour Drinks

9.00 - 9.45 • Session 1

Going Digital

Simon is presenting this lively lecture, teaching his workflows that really work with 3D printing as a solution, combining digital materials and technology with traditional full denture materials. The lecture will cover how to under complicate digital workflows; how to manage the demands for digital transformation on your workplaces and what learning energy is required. The session will also discuss where to find the right education and learning assistance. This lecture also provides an inside view of what to expect from digital dental advancements coming your way.

9.45 - 10.30 • Session 2

Mastering monolithic zirconia

Is it possible to achieve aesthetic results with monolithic zirconia? In this session, Sergio will explain how to choose zirconia for monolithic crowns; the potential of multilayer zirconia for the realisation of full arches and following the right stages to achieve a great result with the right protocols.

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 3

Digital Denture Workflow - A new era in case control

Digital technology is now recognised as an efficient method to produce functional and aesthetically pleasing restorations for our patients.

Accurate recording of the remaining oral structures in the clinical setting remains paramount to the production of a successful prosthetic restoration.

In this presentation, David will explore the technical benefits the digital workflow allows, giving unprecedented control over really every aspect of the technical process, to create the optimal patient outcomes.

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 4

New UltraGLOSS™ 3D printing

In the last few years, only 3D printing materials were creating excitement... until now! At IDS 2023, Asiga introduced their new UltraGLOSS material tray. The results after printing with these trays are mind blowing and have many benefits.

Learn what this new development will do to your business and how you can optimise your internal workflows and aesthetic outcomes.

Many problems from the past will be instantly solved and you will have more successful prints by following certain protocols.

14.15 - 15.00 • Session 5

Digital Diversity - Complex Implant Treatment Solutions

Implants and CAD/CAM milling processes present us with a multitude of restorative options even in situations where there were previously limited or no options. But how do we plan and progress such diverse cases and ensure sound outcomes even in difficult circumstances? In this presentation we will cover the following:

  • Prosthetic Driven Digital Implant planning for Surgery
  • Digital Prosthetic Design - Hybrid and Zirconia Structures
  • Prosthetic rehabilitation in post-oncologic patients
  • Milling Solutions - In-House Metal Milling
  • When things don't go according to plan

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 6

The latest innovations in digital materials and digital equipment

Today digital dentistry is expanding rapidly and further advancements in CAD/CAM equipment, both Scanning and Milling, along with software advances increase the need for further developments in materials. It is essential to understand advances in digital technologies, as well as the evolution of digital materials.

The material science of CAD/CAM restorations - Jim Ruddy

The overall success and aesthetic results of a CAD/CAM restoration depends on the mechanical and optical characteristics of available CAD/CAM materials. The Milling and Grinding of these restorations, along with the science and methods of material production, directly correlate to the speed and accuracy of the restorative solution.

Learning Objectives

  • Understand the latest Digital materials from Ivoclar
  • Understanding which materials are best suited to particular restorative solutions
  • The Ivoclar’s Digital removable materials portfolio

16.15 - 17.00 • Session 7

Dynamic 3D Navigation Implant Surgery

When was the last time you opened the old UBD or Gregory’s Street directory and had your family shout out when you were driving to turn left or right to get to your destination? Do you even remember the old street directory? On the contrary, how often do you open Google Maps or use a GPS tracking system when you’re driving to see where you are positioned on a map? All the time? The future for oral surgery ‘GPS-like’ tracking is here. Surgical navigation technology in dental implantology allows the operator to plan implant positions on preoperative CBCT scans and to translate this to the patient precisely. Live tracking of instrument positions, drill widths, depths and surgical implant placement allows the operator to place the implant into the pre-operative planned position.

The current bulky surgical guides, plus sleeves and long burs are being replaced with dynamic 3D navigation surgery. We now watch a computer screen to guide the placement without the presence of a physical guide. Dynamic 3D navigation provides more accuracy, more access to areas of the mouth where surgical guides cannot be used, optimisation of the available alveolar bone, potentially better aesthetics and design, less invasive procedures and more comfort for patient and operator.

Join me in this lecture with my personal 30 years experience with dental implant surgery and 4 years using this novel 3D navigation technology.

9.00 - 9.45 • Session 1

Going Digital

  • Lecture

Simon is presenting this lively lecture, teaching his workflows that really work with 3D printing as a solution, combining digital materials and technology with traditional full denture materials. The lecture will cover how to under complicate digital workflows; how to manage the demands for digital transformation on your workplaces and what learning energy is required. The session will also discuss where to find the right education and learning assistance. This lecture also provides an inside view of what to expect from digital dental advancements coming your way.

9.45 - 10.30 • Session 2

Mastering monolithic zirconia

  • Lecture

Is it possible to achieve aesthetic results with monolithic zirconia? In this session, Sergio will explain how to choose zirconia for monolithic crowns; the potential of multilayer zirconia for the realisation of full arches and following the right stages to achieve a great result with the right protocols.

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 3

Digital Denture Workflow - A new era in case control

  • Lecture

Digital technology is now recognised as an efficient method to produce functional and aesthetically pleasing restorations for our patients.

Accurate recording of the remaining oral structures in the clinical setting remains paramount to the production of a successful prosthetic restoration.

In this presentation, David will explore the technical benefits the digital workflow allows, giving unprecedented control over really every aspect of the technical process, to create the optimal patient outcomes.

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 4

New UltraGLOSS™ 3D printing

  • Lecture

In the last few years, only 3D printing materials were creating excitement... until now! At IDS 2023, Asiga introduced their new UltraGLOSS material tray. The results after printing with these trays are mind blowing and have many benefits.

Learn what this new development will do to your business and how you can optimise your internal workflows and aesthetic outcomes.

Many problems from the past will be instantly solved and you will have more successful prints by following certain protocols.

14.15 - 15.00 • Session 5

Digital Diversity - Complex Implant Treatment Solutions

  • Lecture

Implants and CAD/CAM milling processes present us with a multitude of restorative options even in situations where there were previously limited or no options. But how do we plan and progress such diverse cases and ensure sound outcomes even in difficult circumstances? In this presentation we will cover the following:

  • Prosthetic Driven Digital Implant planning for Surgery
  • Digital Prosthetic Design - Hybrid and Zirconia Structures
  • Prosthetic rehabilitation in post-oncologic patients
  • Milling Solutions - In-House Metal Milling
  • When things don't go according to plan

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 6

The latest innovations in digital materials and digital equipment

  • Lecture

Today digital dentistry is expanding rapidly and further advancements in CAD/CAM equipment, both Scanning and Milling, along with software advances increase the need for further developments in materials. It is essential to understand advances in digital technologies, as well as the evolution of digital materials.

The material science of CAD/CAM restorations - Jim Ruddy

The overall success and aesthetic results of a CAD/CAM restoration depends on the mechanical and optical characteristics of available CAD/CAM materials. The Milling and Grinding of these restorations, along with the science and methods of material production, directly correlate to the speed and accuracy of the restorative solution.

Learning Objectives

  • Understand the latest Digital materials from Ivoclar
  • Understanding which materials are best suited to particular restorative solutions
  • The Ivoclar’s Digital removable materials portfolio

16.15 - 17.00 • Session 7

Dynamic 3D Navigation Implant Surgery

  • Lecture

When was the last time you opened the old UBD or Gregory’s Street directory and had your family shout out when you were driving to turn left or right to get to your destination? Do you even remember the old street directory? On the contrary, how often do you open Google Maps or use a GPS tracking system when you’re driving to see where you are positioned on a map? All the time? The future for oral surgery ‘GPS-like’ tracking is here. Surgical navigation technology in dental implantology allows the operator to plan implant positions on preoperative CBCT scans and to translate this to the patient precisely. Live tracking of instrument positions, drill widths, depths and surgical implant placement allows the operator to place the implant into the pre-operative planned position.

The current bulky surgical guides, plus sleeves and long burs are being replaced with dynamic 3D navigation surgery. We now watch a computer screen to guide the placement without the presence of a physical guide. Dynamic 3D navigation provides more accuracy, more access to areas of the mouth where surgical guides cannot be used, optimisation of the available alveolar bone, potentially better aesthetics and design, less invasive procedures and more comfort for patient and operator.

Join me in this lecture with my personal 30 years experience with dental implant surgery and 4 years using this novel 3D navigation technology.

9.00 - 10.30 • Session 1

Digital Denture Workflow - A new era in case control

Digital technology is now recognised as an efficient method to produce functional and aesthetically pleasing restorations for our patients.

Accurate recording of the remaining oral structures in the clinical setting remains paramount to the production of a successful prosthetic restoration.

In this presentation, David will explore the technical benefits the digital workflow allows, giving unprecedented control over really every aspect of the technical process, to create the optimal patient outcomes.

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 2

Innovative treatment sequences for predictable digital dentures – a presentation specially curated for dentists

Utilising modern digital/CAD design and principles have elevated removable prosthetics to a higher level of patient care, satisfaction and outcome. In this presentation, you will learn the steps and processes that help open up a better way forward in this sector of dentistry.

Learning Outcomes:

  • Changing the way you think about dentures
  • Complete guidance to treatment steps
  • Reducing your number of appointments
  • Simplifying scanning and try-in
  • Predictable outcomes
  • Dealing with challenging aesthetic expectations
  • Adding value to your patient base/records

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 3

  • ,

The latest innovations in digital materials and digital equipment

Today digital dentistry is expanding rapidly and further advancements in CAD/CAM equipment, both Scanning and Milling, along with software advances increase the need for further developments in materials. It is essential to understand advances in digital technologies, as well as the evolution of digital materials.

Design of CAD/CAM restorations – Doug Stuart

The utilisation of digital technology will only enhance the close cooperation and working relationship of the Dentist/Technician team. The evolution from hand design to digital design and the application of diagnostic smile design previews, along with provisional restorations and the possibility to practically manufacture a copy, serves as a base to create the definite all-ceramic restoration.

Learning Objectives

  • Overview of Ivoclar’s Digital equipment portfolio
  • CAD and CAM Software overview
  • Latest Desktop Scanners for 3 Shape and EXOCAD
  • Asiga Printers and Materials

The material science of CAD/CAM restorations - Jim Ruddy

The overall success and aesthetic results of a CAD/CAM restoration depends on the mechanical and optical characteristics of available CAD/CAM materials. The Milling and Grinding of these restorations, along with the science and methods of material production, directly correlate to the speed and accuracy of the restorative solution.

Learning Objectives

  • Understand the latest Digital materials from Ivoclar
  • Understanding which materials are best suited to particular restorative solutions
  • The Ivoclar’s Digital removable materials portfolio

15.00 - 15.30 • Afternoon Tea

15.30 - 17.00 • Session 4

The best of TRIOS dentistry

Experience the best of TRIOS Dentistry in this 90-minute session. Learn about the evolution of TRIOS and find out what’s new with TRIOS 5.

Following this presentation of real cases, you will have a comprehensive overview of how to set your scan parameters followed by the progression of scanning single zirconia units, multiple units and then full arch crown and bridge cases - All completely impression free, in record time and with precision results.

Dr Ashman will demonstrate TRIOS Smile Design workflow, followed with printed models and a temporisation guide for stress-free larger cases. He will also update you on monolithic zirconia and how to achieve great aesthetics combined with high strength using Ivoclar's e.max Zircad Prime.

Outcomes...

  1. The delegate will be exposed to the latest scanning modules available for Trios.
  2. The delegate will learn what hardware is required to introduce scanning to their clinic.
  3. The delegate will gain insight into scan to lab workflow through presentation of a real cases.
  4. The delegate will learn how to incorporate Smile Design easily into their daily workflow.

17.00 - 19.00 • Happy Hour Drinks

9.00 - 10.30 • Session 1

Digital Denture Workflow - A new era in case control

  • Lecture

Digital technology is now recognised as an efficient method to produce functional and aesthetically pleasing restorations for our patients.

Accurate recording of the remaining oral structures in the clinical setting remains paramount to the production of a successful prosthetic restoration.

In this presentation, David will explore the technical benefits the digital workflow allows, giving unprecedented control over really every aspect of the technical process, to create the optimal patient outcomes.

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 2

Innovative treatment sequences for predictable digital dentures – a presentation specially curated for dentists

  • Lecture

Utilising modern digital/CAD design and principles have elevated removable prosthetics to a higher level of patient care, satisfaction and outcome. In this presentation, you will learn the steps and processes that help open up a better way forward in this sector of dentistry.

Learning Outcomes:

  • Changing the way you think about dentures
  • Complete guidance to treatment steps
  • Reducing your number of appointments
  • Simplifying scanning and try-in
  • Predictable outcomes
  • Dealing with challenging aesthetic expectations
  • Adding value to your patient base/records

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 3

  • ,

The latest innovations in digital materials and digital equipment

  • Lecture

Today digital dentistry is expanding rapidly and further advancements in CAD/CAM equipment, both Scanning and Milling, along with software advances increase the need for further developments in materials. It is essential to understand advances in digital technologies, as well as the evolution of digital materials.

Design of CAD/CAM restorations – Doug Stuart

The utilisation of digital technology will only enhance the close cooperation and working relationship of the Dentist/Technician team. The evolution from hand design to digital design and the application of diagnostic smile design previews, along with provisional restorations and the possibility to practically manufacture a copy, serves as a base to create the definite all-ceramic restoration.

Learning Objectives

  • Overview of Ivoclar’s Digital equipment portfolio
  • CAD and CAM Software overview
  • Latest Desktop Scanners for 3 Shape and EXOCAD
  • Asiga Printers and Materials

The material science of CAD/CAM restorations - Jim Ruddy

The overall success and aesthetic results of a CAD/CAM restoration depends on the mechanical and optical characteristics of available CAD/CAM materials. The Milling and Grinding of these restorations, along with the science and methods of material production, directly correlate to the speed and accuracy of the restorative solution.

Learning Objectives

  • Understand the latest Digital materials from Ivoclar
  • Understanding which materials are best suited to particular restorative solutions
  • The Ivoclar’s Digital removable materials portfolio

15.00 - 15.30 • Afternoon Tea

15.30 - 17.00 • Session 4

The best of TRIOS dentistry

  • Lecture

Experience the best of TRIOS Dentistry in this 90-minute session. Learn about the evolution of TRIOS and find out what’s new with TRIOS 5.

Following this presentation of real cases, you will have a comprehensive overview of how to set your scan parameters followed by the progression of scanning single zirconia units, multiple units and then full arch crown and bridge cases - All completely impression free, in record time and with precision results.

Dr Ashman will demonstrate TRIOS Smile Design workflow, followed with printed models and a temporisation guide for stress-free larger cases. He will also update you on monolithic zirconia and how to achieve great aesthetics combined with high strength using Ivoclar's e.max Zircad Prime.

Outcomes...

  1. The delegate will be exposed to the latest scanning modules available for Trios.
  2. The delegate will learn what hardware is required to introduce scanning to their clinic.
  3. The delegate will gain insight into scan to lab workflow through presentation of a real cases.
  4. The delegate will learn how to incorporate Smile Design easily into their daily workflow.

17.00 - 19.00 • Happy Hour Drinks

9.00 - 10.30 • Session 1

The ABC of restoring implants with TRIOS

Join Dr Ashman for an exclusive Ivoclar presentation. He will guide you through the workflow for restoring all implants. From single fixtures all the way through to full arch All-on-4 implant supported bridgework. Both traditional impression techniques and digital scanning will be covered. All techniques discussed will be applicable to all implant systems available in Australia and New Zealand. Dr Ashman’s presentation will highlight real cases and upon completion of his presentation, you will have the confidence to restore all implants and know what armamentarium is needed.

Outcomes...

  1. Participants will gain a comprehensive knowledge of how implants typically present and which abutments and materials to select.
  2. Participants will understand what components are required for restoring implants.
  3. Participants will gain an understanding of both traditional impression technique and scanning for implants.
  4. The attendee will understand common pitfalls restoring implants and how to overcome them.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 2

Advanced Digital Workflows - Full Mouth Rehab using Time-Tested Scanners, Ceramics and Printables

In this presentation, Dr Ahmad Al-Hassiny from the Institute of Digital Dentistry will show you everything you need to know about tackling crown and bridge cases with the latest intraoral scanners and ceramics. This lecture is focussed on clinical tips and tricks - everything from how to scan these cases properly, utilising digital wax-ups, picking the right ceramic material and provisionalisation with the latest 3D printables. Several clinical cases will be shown, showcasing the entire workflow.

11.45 - 12.30 • Session 3

The latest innovations in digital materials and digital equipment

Today digital dentistry is expanding rapidly and further advancements in CAD/CAM equipment, both Scanning and Milling, along with software advances increase the need for further developments in materials. It is essential to understand advances in digital technologies, as well as the evolution of digital materials.

The material science of CAD/CAM restorations - Jim Ruddy

The overall success and aesthetic results of a CAD/CAM restoration depends on the mechanical and optical characteristics of available CAD/CAM materials. The Milling and Grinding of these restorations, along with the science and methods of material production, directly correlate to the speed and accuracy of the restorative solution.

Learning Objectives

  • Understand the latest Digital materials from Ivoclar
  • Understanding which materials are best suited to particular restorative solutions
  • The Ivoclar’s Digital removable materials portfolio

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 4

Peri-prosthetic excellence in the digital practice

Case discussion and demonstration of various tissue and prosthetic management techniques. This lecture is particularly useful for practitioners seeking to create an optimal pink and white balance in their patient's mouths.

15.00 - 15.30 • Afternoon Tea

15.30 - 17.00 • Session 5

Everything you need to know about restoring implants with e.max and CAD/CAM

e.max restorations are a great solution for a single unit implant. In this lecture and live demo, learn how to optimise this workflow for an aesthetic, long lasting and biologically sound outcome for your patients. We will cover everything from indications, scanning solutions, software management, and finishing and assembly of an e.max implant restoration.

9.00 - 10.30 • Session 1

The ABC of restoring implants with TRIOS

  • Lecture

Join Dr Ashman for an exclusive Ivoclar presentation. He will guide you through the workflow for restoring all implants. From single fixtures all the way through to full arch All-on-4 implant supported bridgework. Both traditional impression techniques and digital scanning will be covered. All techniques discussed will be applicable to all implant systems available in Australia and New Zealand. Dr Ashman’s presentation will highlight real cases and upon completion of his presentation, you will have the confidence to restore all implants and know what armamentarium is needed.

Outcomes...

  1. Participants will gain a comprehensive knowledge of how implants typically present and which abutments and materials to select.
  2. Participants will understand what components are required for restoring implants.
  3. Participants will gain an understanding of both traditional impression technique and scanning for implants.
  4. The attendee will understand common pitfalls restoring implants and how to overcome them.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 2

Advanced Digital Workflows - Full Mouth Rehab using Time-Tested Scanners, Ceramics and Printables

  • Lecture

In this presentation, Dr Ahmad Al-Hassiny from the Institute of Digital Dentistry will show you everything you need to know about tackling crown and bridge cases with the latest intraoral scanners and ceramics. This lecture is focussed on clinical tips and tricks - everything from how to scan these cases properly, utilising digital wax-ups, picking the right ceramic material and provisionalisation with the latest 3D printables. Several clinical cases will be shown, showcasing the entire workflow.

11.45 - 12.30 • Session 3

The latest innovations in digital materials and digital equipment

  • Lecture

Today digital dentistry is expanding rapidly and further advancements in CAD/CAM equipment, both Scanning and Milling, along with software advances increase the need for further developments in materials. It is essential to understand advances in digital technologies, as well as the evolution of digital materials.

The material science of CAD/CAM restorations - Jim Ruddy

The overall success and aesthetic results of a CAD/CAM restoration depends on the mechanical and optical characteristics of available CAD/CAM materials. The Milling and Grinding of these restorations, along with the science and methods of material production, directly correlate to the speed and accuracy of the restorative solution.

Learning Objectives

  • Understand the latest Digital materials from Ivoclar
  • Understanding which materials are best suited to particular restorative solutions
  • The Ivoclar’s Digital removable materials portfolio

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 4

Peri-prosthetic excellence in the digital practice

  • Lecture

Case discussion and demonstration of various tissue and prosthetic management techniques. This lecture is particularly useful for practitioners seeking to create an optimal pink and white balance in their patient's mouths.

15.00 - 15.30 • Afternoon Tea

15.30 - 17.00 • Session 5

Everything you need to know about restoring implants with e.max and CAD/CAM

  • Lecture

e.max restorations are a great solution for a single unit implant. In this lecture and live demo, learn how to optimise this workflow for an aesthetic, long lasting and biologically sound outcome for your patients. We will cover everything from indications, scanning solutions, software management, and finishing and assembly of an e.max implant restoration.

9.00 - 9.45 • Session 1

In-house Clear Aligners the Dental Axess Way

This presentation will explore the opportunities together with the technological advancements for manufacturing of clear aligner solutions in-house and how it can positively impact orthodontic workflows and patient outcomes.

Topics discussed will include:

  • Seamless clear aligner digital workflows;
  • Outsource vs in-house manufacturing;
  • Case and data management from treatment planning through to manufacturing;
  • A review of 3D printing solutions for clear aligner production; and
  • Latest in clear aligner finishing technology.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 2

In-house Clear Aligners the Dental Axess Way

This presentation will explore the opportunities together with the technological advancements for manufacturing of clear aligner solutions in-house and how it can positively impact orthodontic workflows and patient outcomes.

Topics discussed will include:

  • Seamless clear aligner digital workflows;
  • Outsource vs in-house manufacturing;
  • Case and data management from treatment planning through to manufacturing;
  • A review of 3D printing solutions for clear aligner production; and
  • Latest in clear aligner finishing technology.

12.30 - 13.30 • Lunch

13.30 - 17.00 • Session 3

How to achieve amazing results with new generation Amber Mill and Amber Mill Direct

Practical hands-on workshop presented by Cristian Petri

This session is based on the original hands-on course prepared by Cristian following on from the short theoretical base presented earlier. There will be limited places, however will be repeated throughout the conference.

Participants will learn:

  • How to control opacity and value through temperature control of final firing process
  • Managing ultra-thin veneers down to as little as 0.1mm thickness
  • Stain and glaze techniques
  • Polishing and finishing protocols
  • Hands-on exercises using Amber Mill and Amber Mill Direct new generation lithium disilicate

17.00 - 19.00 • Happy Hour Drinks

9.00 - 9.45 • Session 1

In-house Clear Aligners the Dental Axess Way

  • Lecture

This presentation will explore the opportunities together with the technological advancements for manufacturing of clear aligner solutions in-house and how it can positively impact orthodontic workflows and patient outcomes.

Topics discussed will include:

  • Seamless clear aligner digital workflows;
  • Outsource vs in-house manufacturing;
  • Case and data management from treatment planning through to manufacturing;
  • A review of 3D printing solutions for clear aligner production; and
  • Latest in clear aligner finishing technology.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 2

In-house Clear Aligners the Dental Axess Way

  • Lecture

This presentation will explore the opportunities together with the technological advancements for manufacturing of clear aligner solutions in-house and how it can positively impact orthodontic workflows and patient outcomes.

Topics discussed will include:

  • Seamless clear aligner digital workflows;
  • Outsource vs in-house manufacturing;
  • Case and data management from treatment planning through to manufacturing;
  • A review of 3D printing solutions for clear aligner production; and
  • Latest in clear aligner finishing technology.

12.30 - 13.30 • Lunch

13.30 - 17.00 • Session 3

How to achieve amazing results with new generation Amber Mill and Amber Mill Direct

  • Hands-on Workshop
  • ONLY 10 Places

Practical hands-on workshop presented by Cristian Petri

This session is based on the original hands-on course prepared by Cristian following on from the short theoretical base presented earlier. There will be limited places, however will be repeated throughout the conference.

Participants will learn:

  • How to control opacity and value through temperature control of final firing process
  • Managing ultra-thin veneers down to as little as 0.1mm thickness
  • Stain and glaze techniques
  • Polishing and finishing protocols
  • Hands-on exercises using Amber Mill and Amber Mill Direct new generation lithium disilicate

17.00 - 19.00 • Happy Hour Drinks

9.00 - 12.30 • Session 1

How to achieve amazing results with new generation Amber Mill and Amber Mill Direct

Practical hands-on workshop presented by Cristian Petri

This session is based on the original hands-on course prepared by Cristian following on from the short theoretical base presented earlier. There will be limited places, however will be repeated throughout the conference.

Participants will learn:

  • How to control opacity and value through temperature control of final firing process
  • Managing ultra-thin veneers down to as little as 0.1mm thickness
  • Stain and glaze techniques
  • Polishing and finishing protocols
  • Hands-on exercises using Amber Mill and Amber Mill Direct new generation lithium disilicate

12.30 - 13.30 • Lunch

13.30 - 17.00 • Session 2

How to achieve amazing results with new generation Amber Mill and Amber Mill Direct

Practical hands-on workshop presented by Cristian Petri

This session is based on the original hands-on course prepared by Cristian following on from the short theoretical base presented earlier. There will be limited places, however will be repeated throughout the conference.

Participants will learn:

  • How to control opacity and value through temperature control of final firing process
  • Managing ultra-thin veneers down to as little as 0.1mm thickness
  • Stain and glaze techniques
  • Polishing and finishing protocols
  • Hands-on exercises using Amber Mill and Amber Mill Direct new generation lithium disilicate

9.00 - 12.30 • Session 1

How to achieve amazing results with new generation Amber Mill and Amber Mill Direct

  • Hands-on Workshop
  • ONLY 10 Places

Practical hands-on workshop presented by Cristian Petri

This session is based on the original hands-on course prepared by Cristian following on from the short theoretical base presented earlier. There will be limited places, however will be repeated throughout the conference.

Participants will learn:

  • How to control opacity and value through temperature control of final firing process
  • Managing ultra-thin veneers down to as little as 0.1mm thickness
  • Stain and glaze techniques
  • Polishing and finishing protocols
  • Hands-on exercises using Amber Mill and Amber Mill Direct new generation lithium disilicate

12.30 - 13.30 • Lunch

13.30 - 17.00 • Session 2

How to achieve amazing results with new generation Amber Mill and Amber Mill Direct

  • Hands-on Workshop
  • ONLY 10 Places

Practical hands-on workshop presented by Cristian Petri

This session is based on the original hands-on course prepared by Cristian following on from the short theoretical base presented earlier. There will be limited places, however will be repeated throughout the conference.

Participants will learn:

  • How to control opacity and value through temperature control of final firing process
  • Managing ultra-thin veneers down to as little as 0.1mm thickness
  • Stain and glaze techniques
  • Polishing and finishing protocols
  • Hands-on exercises using Amber Mill and Amber Mill Direct new generation lithium disilicate

9.00 - 9.45 • Session 1

Let’s Get Digital (Getting the most out of digital dentistry in the General Practice)

In this lecture, Dr Joe will share with you his digital dentistry story from when he introduced a scanner to when he added milling, printing and aligners, covering the choices of what to keep inhouse and what he doesn’t in the modern digital world.

9.45 - 10.30 • Session 2

How changes in patient behaviour impact your plans to do more digital dentistry

Digital dentistry brings together cutting-edge technology for dentists and life-changing smile improvements for patients. Win-win right?

While dentists’ appetite for dentistry is at an all time high, that doesn’t mean that patients feel the same way about it.

Changes in patient behaviour mean that unfortunately, introducing digital dentistry to your practice is not a case of ‘build it and they will come’.

Fortunately, there is a solution and it’s within reach of dentists ready to embrace the opportunity.

Join Australia’s number one Google-ranked dental marketer, Angus Pryor, to discover:

  • The disconnect between dentist and patient views about digital dentistry and how to bridge the gap
  • The change in patient behaviour that requires an adjustment in how dentists promote their digital dentistry services
  • The 3 most common mistakes that dentists make promoting digital dentistry and how to avoid them
  • Why your website is acting more like a 10 foot wall and not an open door in your efforts to attract patients seeking digital dentistry
  • The two questions to ask patients that will have patients asking you for digital dentistry services without you having to sell a thing

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 3

Intraoral Scanner and 3D Printer Review 2023 - Which Scanner and Printer Should You Buy For Your Clinic?

In this independent and unsponsored session, Dr Ahmad Al-Hassiny from the Institute of Digital Dentistry will go over an entire intraoral scanner and 3D printer market overview to give you everything you need to know when making an investment choice in 2023. Learn about which products are better than others, which scanners are the best currently and the pros and cons of each mainstream IOS device. He will also cover how to choose a 3D printer based on your clinic's needs. This talk is totally brand-agnostic, unbiased and is based on clinical experience and findings - not to be missed if you are on the market to buy some new tech for your clinic!

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 4

Batch Based Clear Aligners: Mastering Orthodontic Outcomes

Orthodontics has always been an act and react style of treatment in which the clinician continually dials in the individual treatment plan to ensure the patient is being treated in the most efficient and effective way possible.

Traditional clear aligner systems seem to have stepped away from this approach by providing an entire start to finish set of aligners, despite each patient having different responses to the treatment based on their own unique biology, levels of compliance and individual biomechanical side effects.

Delivering clear aligners through a batch based system, in which the patient is only provided a limited set of aligners before needing a fresh intraoral scan, is proving to be a complete game changer in Dr Marc’s clinic with an incredible leap forward in control of treatment outcomes.

Dr Marc will discuss the current literature surrounding clear aligner treatments, the concept and benefits of batch-based clear aligners and provide a detailed clinical and lab walkthrough as to how this system is implemented.

Dr Marc's insight is both academic through extensive training in orthodontics and also practically-based through working in his own busy practice in Perth which produces its own brand of clear aligners using intraoral scanning and 3D printing.

15.00 - 15.30 • Afternoon Tea

15.30 - 17.00 • Session 5

iTero intra oral scanner restorative platform

In this session, Dr Milgate will outline the updated workflows available with the iTero scanner and includes a practical discussion of the key benefits of its use. A number of completed cases will be presented showing the range of treatment options and materials available through the digital workflow.

17.00 - 19.00 • Happy Hour Drinks

9.00 - 9.45 • Session 1

Let’s Get Digital (Getting the most out of digital dentistry in the General Practice)

  • Lecture

In this lecture, Dr Joe will share with you his digital dentistry story from when he introduced a scanner to when he added milling, printing and aligners, covering the choices of what to keep inhouse and what he doesn’t in the modern digital world.

9.45 - 10.30 • Session 2

How changes in patient behaviour impact your plans to do more digital dentistry

  • Lecture

Digital dentistry brings together cutting-edge technology for dentists and life-changing smile improvements for patients. Win-win right?

While dentists’ appetite for dentistry is at an all time high, that doesn’t mean that patients feel the same way about it.

Changes in patient behaviour mean that unfortunately, introducing digital dentistry to your practice is not a case of ‘build it and they will come’.

Fortunately, there is a solution and it’s within reach of dentists ready to embrace the opportunity.

Join Australia’s number one Google-ranked dental marketer, Angus Pryor, to discover:

  • The disconnect between dentist and patient views about digital dentistry and how to bridge the gap
  • The change in patient behaviour that requires an adjustment in how dentists promote their digital dentistry services
  • The 3 most common mistakes that dentists make promoting digital dentistry and how to avoid them
  • Why your website is acting more like a 10 foot wall and not an open door in your efforts to attract patients seeking digital dentistry
  • The two questions to ask patients that will have patients asking you for digital dentistry services without you having to sell a thing

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 3

Intraoral Scanner and 3D Printer Review 2023 - Which Scanner and Printer Should You Buy For Your Clinic?

  • Lecture

In this independent and unsponsored session, Dr Ahmad Al-Hassiny from the Institute of Digital Dentistry will go over an entire intraoral scanner and 3D printer market overview to give you everything you need to know when making an investment choice in 2023. Learn about which products are better than others, which scanners are the best currently and the pros and cons of each mainstream IOS device. He will also cover how to choose a 3D printer based on your clinic's needs. This talk is totally brand-agnostic, unbiased and is based on clinical experience and findings - not to be missed if you are on the market to buy some new tech for your clinic!

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 4

Batch Based Clear Aligners: Mastering Orthodontic Outcomes

  • Lecture

Orthodontics has always been an act and react style of treatment in which the clinician continually dials in the individual treatment plan to ensure the patient is being treated in the most efficient and effective way possible.

Traditional clear aligner systems seem to have stepped away from this approach by providing an entire start to finish set of aligners, despite each patient having different responses to the treatment based on their own unique biology, levels of compliance and individual biomechanical side effects.

Delivering clear aligners through a batch based system, in which the patient is only provided a limited set of aligners before needing a fresh intraoral scan, is proving to be a complete game changer in Dr Marc’s clinic with an incredible leap forward in control of treatment outcomes.

Dr Marc will discuss the current literature surrounding clear aligner treatments, the concept and benefits of batch-based clear aligners and provide a detailed clinical and lab walkthrough as to how this system is implemented.

Dr Marc's insight is both academic through extensive training in orthodontics and also practically-based through working in his own busy practice in Perth which produces its own brand of clear aligners using intraoral scanning and 3D printing.

15.00 - 15.30 • Afternoon Tea

15.30 - 17.00 • Session 5

iTero intra oral scanner restorative platform

  • Lecture

In this session, Dr Milgate will outline the updated workflows available with the iTero scanner and includes a practical discussion of the key benefits of its use. A number of completed cases will be presented showing the range of treatment options and materials available through the digital workflow.

17.00 - 19.00 • Happy Hour Drinks

9.00 - 10.30 • Session 1

Digital Smile Design in the 3D World

A successful patient-centred treatment outcome begins with accurate planning and precise communications. Dr Tom will take you through a case presentation, explaining in detail every step of the way, utilising the latest 3D chairside technologies. From acquisition of 3D patient records, to printing of wax up models, temporary try-in mock ups and long term highly aesthetic restorations that will WOW the most discerning patient.

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 2

My digital implant dentistry journey

One dentist’s journey in the world of digital implant surgery and digital restorative workflow.

In this presentation, Dr So will share with you why she was an early adopter of digital implant planning and guided surgery protocols, how 3Shape and 3D imaging has changed her practice, share with you her clinical cases, and share tips and tricks for clinicians looking to adopt a digital workflow.

Time will be allocated for Q and A discussion.

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 3

iTero intra oral scanner diagnostic tools + comprehensive dentistry and much more...

In 2023, interdisciplinary digital records is fast becoming the standard in dental practice. This session will discuss the "new normal" in comprehensive patient examination, indemnification, education and treatment planning. Dr Milgate will discuss how this can be achieved and what it means for the future.

15.00 - 15.30 • Afternoon Tea

15.30 - 17.00 • Session 4

1 + 1 + 1 = 10X

The FOUR Things Your Business Must Be Doing All Of In 2023 and Beyond to MAXIMISE Your Practice Growth...

Just like a four-legged table, there are four essential things that every dental practice needs to be doing at the same time in order to 10x their Practice Growth…

1. Mastering SMS Practice to Patient messaging

Nearly every business out there at present is SMSing their clients poorly… in fact in most cases the SMSs are so poorly written that they are in fact REPELLING clients away rather than attracting them towards the business.

2. Call recordings

You can’t fix what you can’t see is broken.

f you’re not listening to what’s being said on your practice phone calls, and what your callers are asking, and what your team are saying, you may as well just be burning money in your fireplace…at least it will keep you warm for a short time.

If McDonalds can train 13 year-olds to use their scripts because those scripts work, why can’t dental practices have the same philosophies adhered to?

3. SEO and Adwords

There’s a lot of smoke and mirrors out there when it comes to SEO and Adwords. The fact is that you can’t take clicks to the grocery store to buy food… what you need is CASH, and CASH comes from SALES.. we’ll cut through the BS and let you know exactly what you should be doing and what else you should not be doing.

4. AI and Chat GPT

Despite the rapid advancements in AI, there are some things the human brain and heart still will be needed to do, in order to maximise learning, and education, and results. I’ll tell you exactly what those things are, that the fourth leg of the table needs for stability.

9.00 - 10.30 • Session 1

Digital Smile Design in the 3D World

  • Lecture

A successful patient-centred treatment outcome begins with accurate planning and precise communications. Dr Tom will take you through a case presentation, explaining in detail every step of the way, utilising the latest 3D chairside technologies. From acquisition of 3D patient records, to printing of wax up models, temporary try-in mock ups and long term highly aesthetic restorations that will WOW the most discerning patient.

10.30 - 11.00 • Morning Tea

11.00 - 12.30 • Session 2

My digital implant dentistry journey

  • Lecture

One dentist’s journey in the world of digital implant surgery and digital restorative workflow.

In this presentation, Dr So will share with you why she was an early adopter of digital implant planning and guided surgery protocols, how 3Shape and 3D imaging has changed her practice, share with you her clinical cases, and share tips and tricks for clinicians looking to adopt a digital workflow.

Time will be allocated for Q and A discussion.

12.30 - 13.30 • Lunch

13.30 - 15.00 • Session 3

iTero intra oral scanner diagnostic tools + comprehensive dentistry and much more...

  • Lecture

In 2023, interdisciplinary digital records is fast becoming the standard in dental practice. This session will discuss the "new normal" in comprehensive patient examination, indemnification, education and treatment planning. Dr Milgate will discuss how this can be achieved and what it means for the future.

15.00 - 15.30 • Afternoon Tea

15.30 - 17.00 • Session 4

1 + 1 + 1 = 10X

  • Lecture

The FOUR Things Your Business Must Be Doing All Of In 2023 and Beyond to MAXIMISE Your Practice Growth...

Just like a four-legged table, there are four essential things that every dental practice needs to be doing at the same time in order to 10x their Practice Growth…

1. Mastering SMS Practice to Patient messaging

Nearly every business out there at present is SMSing their clients poorly… in fact in most cases the SMSs are so poorly written that they are in fact REPELLING clients away rather than attracting them towards the business.

2. Call recordings

You can’t fix what you can’t see is broken.

f you’re not listening to what’s being said on your practice phone calls, and what your callers are asking, and what your team are saying, you may as well just be burning money in your fireplace…at least it will keep you warm for a short time.

If McDonalds can train 13 year-olds to use their scripts because those scripts work, why can’t dental practices have the same philosophies adhered to?

3. SEO and Adwords

There’s a lot of smoke and mirrors out there when it comes to SEO and Adwords. The fact is that you can’t take clicks to the grocery store to buy food… what you need is CASH, and CASH comes from SALES.. we’ll cut through the BS and let you know exactly what you should be doing and what else you should not be doing.

4. AI and Chat GPT

Despite the rapid advancements in AI, there are some things the human brain and heart still will be needed to do, in order to maximise learning, and education, and results. I’ll tell you exactly what those things are, that the fourth leg of the table needs for stability.

9.00 - 10.30 • Session 1

Streamlining success: The advantages of a unified workflow system over disjointed machinery

With technology in the dental industry evolving so rapidly its important your business develops and adapts with it or your business could be left behind as so many in other industries that chose to ignore developing technology in their field. There are now so many CAD/CAM options its important to make the right investment in a complete system developed by an experienced Dental CADCAM company. This presentation will discuss who Amann Girrbach are as a company, the very successful history in dental and CADCAM and what is on offer to the digital dental world.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 2

Uncovering the differences in zirconia materials: Why not all zirconia is created equal

Zircon oxide is now indispensable as a material for highly aesthetic, durable prosthetic restorations. Due to its exceptional fracture toughness, wear resistance and biocompatibility the high-tech ceramic was used in hip-joint prosthetics. Because of its tooth-like colour zircon oxide became increasingly important in dentistry towards the end of the 1990s, where it is often the restoration material of choice thanks to its optical adaptability, stability and range of indications. Although how zirconia is manufactured and tested is important to the end result. As not all zirconia is the same.

With its broad portfolio of zirconia blanks, Amann Girrbach offers the right material for virtually every permanent indication to enable the fabrication of restorations with long term stability and natural aesthetics both economically and efficiently.

11.45 - 12.30 • Session 3

Model-free digital dentistry in daily practice

More and more clinicians are entering in to the field of digital dentistry. Industry offers constantly new devices and technologies – but can these new gadgets help us to make our daily work in the clinic and the dental laboratory easier and better? Yes! The challenge is to implement a clinical workflow that is connected to the workflow of the dental laboratory. Our research after 14 years of experience has shown that there are many obstacles to achieve a seamless workflow that enables a predictable outcomes. Often the promised applications and devices did not reached the quality standards of traditional analog dentistry. This presentation will give an insight into a model-free workflow in fixed prosthodontics both on teeth and implants covering the clinical but also the laboratory side. The different choice of materials and their limitations will be discussed. Focus will also be on the technology used and the strategy of how to achieve efficient, cost-effective and high quality results.

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 4

Automation - the rise of the machines?

Why is true automation in a CAD/CAM system so important in today's dental lab? In this presentation Rainer Woeran MDT, from Toothworx in Adelaide, will discuss the changes and the challenges with the integration of the Ceramill Matik and the impacts on his lab with an automated milling machine. This Matik has the most operating hours in Australia today! Does it hold up to its promise? Has it increased productivity? And what went wrong!

14.15 - 15.00 • Session 5

From Dark Ages to Digital; Optimising Workflow and Outcomes for Edentulous Patients

Engineering occlusion with VITA VIONIC and Amman Girrbachs Ceramill Full Denture System - using a unified workflow to streamline edentulous patient outcomes in the clinic and in the laboratory.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 6

Dentures: Comparing conventional methods with digital workflows

A complete comparison of methods, materials and devices used conventionally to fabricate full and partial dentures and how the digital space we currently embrace isn't too far from what we already know and use.

16.15 - 17.00 • Session 7

Direct to fixture milled zirconia to titanium implants. Without any abutments, ever!

Discover the TRI-matrix implant connection designed for Zirconia. See how the future of full arch solutions is here today, with only 1 screw required per implant fixture. Get free access to the full anatomical “Healing Collar Library” and an introduction to the “Scan-Bridge”, the easiest and most cost-effective way to accurately scan an edentulous arch (With any IOS!).

17.00 - 19.00 • Happy Hour Drinks

9.00 - 10.30 • Session 1

Streamlining success: The advantages of a unified workflow system over disjointed machinery

  • Lecture

With technology in the dental industry evolving so rapidly its important your business develops and adapts with it or your business could be left behind as so many in other industries that chose to ignore developing technology in their field. There are now so many CAD/CAM options its important to make the right investment in a complete system developed by an experienced Dental CADCAM company. This presentation will discuss who Amann Girrbach are as a company, the very successful history in dental and CADCAM and what is on offer to the digital dental world.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 2

Uncovering the differences in zirconia materials: Why not all zirconia is created equal

  • Lecture

Zircon oxide is now indispensable as a material for highly aesthetic, durable prosthetic restorations. Due to its exceptional fracture toughness, wear resistance and biocompatibility the high-tech ceramic was used in hip-joint prosthetics. Because of its tooth-like colour zircon oxide became increasingly important in dentistry towards the end of the 1990s, where it is often the restoration material of choice thanks to its optical adaptability, stability and range of indications. Although how zirconia is manufactured and tested is important to the end result. As not all zirconia is the same.

With its broad portfolio of zirconia blanks, Amann Girrbach offers the right material for virtually every permanent indication to enable the fabrication of restorations with long term stability and natural aesthetics both economically and efficiently.

11.45 - 12.30 • Session 3

Model-free digital dentistry in daily practice

  • Lecture

More and more clinicians are entering in to the field of digital dentistry. Industry offers constantly new devices and technologies – but can these new gadgets help us to make our daily work in the clinic and the dental laboratory easier and better? Yes! The challenge is to implement a clinical workflow that is connected to the workflow of the dental laboratory. Our research after 14 years of experience has shown that there are many obstacles to achieve a seamless workflow that enables a predictable outcomes. Often the promised applications and devices did not reached the quality standards of traditional analog dentistry. This presentation will give an insight into a model-free workflow in fixed prosthodontics both on teeth and implants covering the clinical but also the laboratory side. The different choice of materials and their limitations will be discussed. Focus will also be on the technology used and the strategy of how to achieve efficient, cost-effective and high quality results.

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 4

Automation - the rise of the machines?

  • Lecture

Why is true automation in a CAD/CAM system so important in today's dental lab? In this presentation Rainer Woeran MDT, from Toothworx in Adelaide, will discuss the changes and the challenges with the integration of the Ceramill Matik and the impacts on his lab with an automated milling machine. This Matik has the most operating hours in Australia today! Does it hold up to its promise? Has it increased productivity? And what went wrong!

14.15 - 15.00 • Session 5

From Dark Ages to Digital; Optimising Workflow and Outcomes for Edentulous Patients

  • Lecture

Engineering occlusion with VITA VIONIC and Amman Girrbachs Ceramill Full Denture System - using a unified workflow to streamline edentulous patient outcomes in the clinic and in the laboratory.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 6

Dentures: Comparing conventional methods with digital workflows

  • Lecture

A complete comparison of methods, materials and devices used conventionally to fabricate full and partial dentures and how the digital space we currently embrace isn't too far from what we already know and use.

16.15 - 17.00 • Session 7

Direct to fixture milled zirconia to titanium implants. Without any abutments, ever!

  • Lecture

Discover the TRI-matrix implant connection designed for Zirconia. See how the future of full arch solutions is here today, with only 1 screw required per implant fixture. Get free access to the full anatomical “Healing Collar Library” and an introduction to the “Scan-Bridge”, the easiest and most cost-effective way to accurately scan an edentulous arch (With any IOS!).

17.00 - 19.00 • Happy Hour Drinks

9.00 - 10.30 • Session 1

Streamlining success: The advantages of a unified workflow system over disjointed machinery

With technology in the dental industry evolving so rapidly its important your business develops and adapts with it or your business could be left behind as so many in other industries that chose to ignore developing technology in their field. There are now so many CAD/CAM options its important to make the right investment in a complete system developed by an experienced Dental CADCAM company. This presentation will discuss who Amann Girrbach are as a company, the very successful history in dental and CADCAM and what is on offer to the digital dental world.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 2

Uncovering the differences in zirconia materials: Why not all zirconia is created equal

Zircon oxide is now indispensable as a material for highly aesthetic, durable prosthetic restorations. Due to its exceptional fracture toughness, wear resistance and biocompatibility the high-tech ceramic was used in hip-joint prosthetics. Because of its tooth-like colour zircon oxide became increasingly important in dentistry towards the end of the 1990s, where it is often the restoration material of choice thanks to its optical adaptability, stability and range of indications. Although how zirconia is manufactured and tested is important to the end result. As not all zirconia is the same.

With its broad portfolio of zirconia blanks, Amann Girrbach offers the right material for virtually every permanent indication to enable the fabrication of restorations with long term stability and natural aesthetics both economically and efficiently.

11.45 - 12.30 • Session 3

Direct to fixture milled zirconia to titanium implants. Without any abutments, ever!

Discover the TRI-matrix implant connection designed for Zirconia. See how the future of full arch solutions is here today, with only 1 screw required per implant fixture. Get free access to the full anatomical “Healing Collar Library” and an introduction to the “Scan-Bridge”, the easiest and most cost-effective way to accurately scan an edentulous arch (With any IOS!).

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 4

Automation - the rise of the machines?

Why is true automation in a CAD/CAM system so important in today's dental lab? In this presentation Rainer Woeran MDT, from Toothworx in Adelaide, will discuss the changes and the challenges with the integration of the Ceramill Matik and the impacts on his lab with an automated milling machine. This Matik has the most operating hours in Australia today! Does it hold up to its promise? Has it increased productivity? And what went wrong!

14.15 - 15.00 • Session 5

From Dark Ages to Digital; Optimising Workflow and Outcomes for Edentulous Patients

Engineering occlusion with VITA VIONIC and Amman Girrbachs Ceramill Full Denture System - using a unified workflow to streamline edentulous patient outcomes in the clinic and in the laboratory.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 6

Model-free digital dentistry in daily practice

More and more clinicians are entering in to the field of digital dentistry. Industry offers constantly new devices and technologies – but can these new gadgets help us to make our daily work in the clinic and the dental laboratory easier and better? Yes! The challenge is to implement a clinical workflow that is connected to the workflow of the dental laboratory. Our research after 14 years of experience has shown that there are many obstacles to achieve a seamless workflow that enables a predictable outcomes. Often the promised applications and devices did not reached the quality standards of traditional analog dentistry. This presentation will give an insight into a model-free workflow in fixed prosthodontics both on teeth and implants covering the clinical but also the laboratory side. The different choice of materials and their limitations will be discussed. Focus will also be on the technology used and the strategy of how to achieve efficient, cost-effective and high quality results.

16.15 - 17.00 • Session 7

Dentures: Comparing conventional methods with digital workflows

A complete comparison of methods, materials and devices used conventionally to fabricate full and partial dentures and how the digital space we currently embrace isn't too far from what we already know and use.

9.00 - 10.30 • Session 1

Streamlining success: The advantages of a unified workflow system over disjointed machinery

  • Lecture

With technology in the dental industry evolving so rapidly its important your business develops and adapts with it or your business could be left behind as so many in other industries that chose to ignore developing technology in their field. There are now so many CAD/CAM options its important to make the right investment in a complete system developed by an experienced Dental CADCAM company. This presentation will discuss who Amann Girrbach are as a company, the very successful history in dental and CADCAM and what is on offer to the digital dental world.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 2

Uncovering the differences in zirconia materials: Why not all zirconia is created equal

  • Lecture

Zircon oxide is now indispensable as a material for highly aesthetic, durable prosthetic restorations. Due to its exceptional fracture toughness, wear resistance and biocompatibility the high-tech ceramic was used in hip-joint prosthetics. Because of its tooth-like colour zircon oxide became increasingly important in dentistry towards the end of the 1990s, where it is often the restoration material of choice thanks to its optical adaptability, stability and range of indications. Although how zirconia is manufactured and tested is important to the end result. As not all zirconia is the same.

With its broad portfolio of zirconia blanks, Amann Girrbach offers the right material for virtually every permanent indication to enable the fabrication of restorations with long term stability and natural aesthetics both economically and efficiently.

11.45 - 12.30 • Session 3

Direct to fixture milled zirconia to titanium implants. Without any abutments, ever!

  • Lecture

Discover the TRI-matrix implant connection designed for Zirconia. See how the future of full arch solutions is here today, with only 1 screw required per implant fixture. Get free access to the full anatomical “Healing Collar Library” and an introduction to the “Scan-Bridge”, the easiest and most cost-effective way to accurately scan an edentulous arch (With any IOS!).

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 4

Automation - the rise of the machines?

  • Lecture

Why is true automation in a CAD/CAM system so important in today's dental lab? In this presentation Rainer Woeran MDT, from Toothworx in Adelaide, will discuss the changes and the challenges with the integration of the Ceramill Matik and the impacts on his lab with an automated milling machine. This Matik has the most operating hours in Australia today! Does it hold up to its promise? Has it increased productivity? And what went wrong!

14.15 - 15.00 • Session 5

From Dark Ages to Digital; Optimising Workflow and Outcomes for Edentulous Patients

  • Lecture

Engineering occlusion with VITA VIONIC and Amman Girrbachs Ceramill Full Denture System - using a unified workflow to streamline edentulous patient outcomes in the clinic and in the laboratory.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 6

Model-free digital dentistry in daily practice

  • Lecture

More and more clinicians are entering in to the field of digital dentistry. Industry offers constantly new devices and technologies – but can these new gadgets help us to make our daily work in the clinic and the dental laboratory easier and better? Yes! The challenge is to implement a clinical workflow that is connected to the workflow of the dental laboratory. Our research after 14 years of experience has shown that there are many obstacles to achieve a seamless workflow that enables a predictable outcomes. Often the promised applications and devices did not reached the quality standards of traditional analog dentistry. This presentation will give an insight into a model-free workflow in fixed prosthodontics both on teeth and implants covering the clinical but also the laboratory side. The different choice of materials and their limitations will be discussed. Focus will also be on the technology used and the strategy of how to achieve efficient, cost-effective and high quality results.

16.15 - 17.00 • Session 7

Dentures: Comparing conventional methods with digital workflows

  • Lecture

A complete comparison of methods, materials and devices used conventionally to fabricate full and partial dentures and how the digital space we currently embrace isn't too far from what we already know and use.

9.00 - 9.45 • Session 1

The 3D printing boat has sailed, did you miss it?

After visiting IDS in Cologne earlier this year, it’s obvious the biggest thing in dentistry is 3D printing. Whether it be chairside or lab-side, 3D printing is exploding to become one of the most game changing technologies dentistry has ever seen. In this talk, we will investigate all the latest in 3D printing technologies , developments in new resins and new printers and the plethora of applications that are available today to use. Even if you are familiar with 3D printing, there will be something surprising for you in this talk, not to be missed.

9.45 - 10.30 • Session 2

Affordable wireless intraoral scanning

Traditional Impressions are so last century! Nowadays, no-one has an excuse not to have an intraoral scanner in their practice. Performance and price has come to a level that it is now affordable for everyone. As with all technology, prices eventually tumble and this is no more true than with the intraoral scanner revolution. This lecture will discuss various intraoral scanners, technologies and software and also offer a hands-on demonstration with the new WIRELESS AORALSCAN 3 from Shining 3D using the latest technology WIRELESS 6.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 3

  • ,

Choosing a 3D printer and why AI and automation are the future

Choosing any new piece of equipment is often fraught with a minefield of misinformation, advertising hype and just plain BS. In this talk we will cut to the chase and give an unbiased assessment of the different types of 3D printers available, their application in the dental profession, performance issues and how to critically choose the 3D printer you need rather than the printer you think you want.

As a bonus an introduction to AI printing and automation will also be included by special guest speaker Hiro Takahashi.

11.45 - 12.30 • Session 4

Blenderfordental - An introduction

Australian developed and IDS 2023 global cult sensation, Blenderfordental® is not a stand alone dental design software as such; it is an application add-on for Blender so it can be easily used for dentistry. These add-ons are delivered as modules for specific dental related tasks, such as designing crowns or bridges. Each module comes with the required easy to follow tutorials which will guide you through the full functions of the module. This introduction will discuss each module and its purpose from designing 3D models or orthodontic splints, to more complex procedures like implant guides.

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 5

Why you need to know the science of modern 3D printing materials

Popular culture tells us that we can 3D print anything, so how do you print a zirconia crown, a titanium implant, or an invisible orthodontic aligner from the comfort of your clinic chair? In this presentation, Justin Elsey, chemical engineer and founder of ASIGA, will discuss the properties of 3D printing materials, their requirements, capabilities, limitations and new technologies which impact future applications in digital dentistry.

14.15 - 15.00 • Session 6

MetiSmile - The new 3D facial scanner and why you need one

Facial scanning used to be expensive and the integration into other programs less than optimal. Now with MetiSmile from Shining 3D, it’s both affordable and easy to integrate into CAD programs so you can really get an idea of how the face will relate to the treatment you are planning. Things like digital smile design can now go to a whole new level with affordable facial scanning. This talk will also demonstrate the new device.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 7

New DGSHAPE DWX 53 DC powerhouse milling

DGSHAPE creates some of the best, most-reliable desktop milling solutions available for dentistry. This lecture will cover the entire range and introduce the latest DWX 53 DC. From the dry mills for zirconia, wax and polymers to the new wet mill for glass ceramics and titanium, DGSHAPE has it covered. In addition, as no milling system can run without CAM software, the latest advances in Millbox CAM software will be presented.

16.15 - 17.00 • Session 8

Give your 3D printer a tune up!

Modern 3D printers are easy to use, however a thorough understanding of their correct operation is imperative to avoid expensive pitfalls that can, in some cases, render a machine useless. This talk will discuss correct everyday routines for the use and maintenance of 3D printers to achieve great results every time and to prolong the lifespan of the machine.

17.00 - 19.00 • Happy Hour Drinks

9.00 - 9.45 • Session 1

The 3D printing boat has sailed, did you miss it?

  • Lecture

After visiting IDS in Cologne earlier this year, it’s obvious the biggest thing in dentistry is 3D printing. Whether it be chairside or lab-side, 3D printing is exploding to become one of the most game changing technologies dentistry has ever seen. In this talk, we will investigate all the latest in 3D printing technologies , developments in new resins and new printers and the plethora of applications that are available today to use. Even if you are familiar with 3D printing, there will be something surprising for you in this talk, not to be missed.

9.45 - 10.30 • Session 2

Affordable wireless intraoral scanning

  • Lecture

Traditional Impressions are so last century! Nowadays, no-one has an excuse not to have an intraoral scanner in their practice. Performance and price has come to a level that it is now affordable for everyone. As with all technology, prices eventually tumble and this is no more true than with the intraoral scanner revolution. This lecture will discuss various intraoral scanners, technologies and software and also offer a hands-on demonstration with the new WIRELESS AORALSCAN 3 from Shining 3D using the latest technology WIRELESS 6.

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 3

  • ,

Choosing a 3D printer and why AI and automation are the future

  • Lecture

Choosing any new piece of equipment is often fraught with a minefield of misinformation, advertising hype and just plain BS. In this talk we will cut to the chase and give an unbiased assessment of the different types of 3D printers available, their application in the dental profession, performance issues and how to critically choose the 3D printer you need rather than the printer you think you want.

As a bonus an introduction to AI printing and automation will also be included by special guest speaker Hiro Takahashi.

11.45 - 12.30 • Session 4

Blenderfordental - An introduction

  • Lecture

Australian developed and IDS 2023 global cult sensation, Blenderfordental® is not a stand alone dental design software as such; it is an application add-on for Blender so it can be easily used for dentistry. These add-ons are delivered as modules for specific dental related tasks, such as designing crowns or bridges. Each module comes with the required easy to follow tutorials which will guide you through the full functions of the module. This introduction will discuss each module and its purpose from designing 3D models or orthodontic splints, to more complex procedures like implant guides.

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 5

Why you need to know the science of modern 3D printing materials

  • Lecture

Popular culture tells us that we can 3D print anything, so how do you print a zirconia crown, a titanium implant, or an invisible orthodontic aligner from the comfort of your clinic chair? In this presentation, Justin Elsey, chemical engineer and founder of ASIGA, will discuss the properties of 3D printing materials, their requirements, capabilities, limitations and new technologies which impact future applications in digital dentistry.

14.15 - 15.00 • Session 6

MetiSmile - The new 3D facial scanner and why you need one

  • Lecture

Facial scanning used to be expensive and the integration into other programs less than optimal. Now with MetiSmile from Shining 3D, it’s both affordable and easy to integrate into CAD programs so you can really get an idea of how the face will relate to the treatment you are planning. Things like digital smile design can now go to a whole new level with affordable facial scanning. This talk will also demonstrate the new device.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 7

New DGSHAPE DWX 53 DC powerhouse milling

  • Lecture

DGSHAPE creates some of the best, most-reliable desktop milling solutions available for dentistry. This lecture will cover the entire range and introduce the latest DWX 53 DC. From the dry mills for zirconia, wax and polymers to the new wet mill for glass ceramics and titanium, DGSHAPE has it covered. In addition, as no milling system can run without CAM software, the latest advances in Millbox CAM software will be presented.

16.15 - 17.00 • Session 8

Give your 3D printer a tune up!

  • Lecture

Modern 3D printers are easy to use, however a thorough understanding of their correct operation is imperative to avoid expensive pitfalls that can, in some cases, render a machine useless. This talk will discuss correct everyday routines for the use and maintenance of 3D printers to achieve great results every time and to prolong the lifespan of the machine.

17.00 - 19.00 • Happy Hour Drinks

9.00 - 9.45 • Session 1

3D Printing Masterclass: Accuracy, settings, calibration , materials and supports plus bonus... New direct aligner printing

3D Printing dental models is actually easy, however more complex parts such as crowns, denture bases, splints and surgical guides are more challenging. There is nothing worse than a print failure and there are many factors that can effect this. This presentation will discuss materials and methods of software manipulation and machine settings so you can optimise parts to get successful printing every time. Regardless of the printer you have or are thinking of purchasing, this is a not to be missed presentation. As a bonus, the new methods for direct aligner printing will be covered.

9.45 - 10.30 • Session 2

The printed restoration - is it the end of the milling era?

It's time to get out your pitchforks and torches out as we dive head first into a hearty discussion on 3D printed restorations. Are these restorations strong enough for long-term use? Are printed restorations aesthetic enough for anterior use? Is that mill sitting in your practice going to end up as an expensive door stop?

In this topical lecture, Dr Andrew Ip will go through the current status of printable crown and bridge resins and discuss whether they have a place in an already saturated dental restorative materials market (hopefully without breaking too many hearts)!

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 3

Get the right training and support you need for your high tech digital products

Training costs money and as we all are in the market for the best products at the lowest prices something has to give and it’s usually training and support that suffers. In this talk, Jeroen will discuss why it's important, especially when purchasing unfamiliar tech, to get correct initial training for you and your staff and why it's important to get ongoing support. Then he will reveal a new and unique way this can be done and delivered to you in the modern digital world.

11.45 - 12.30 • Session 4

Design and print an immediate denture now

3D printing is fast offering solutions for creating dentures digitally. This talk will cover the scanning, preparation, designing and printing of a full immediate denture. Various different softwares will be discussed and an introduction to printable denture base materials and new tooth resins will be covered. Selection of the correct printer fit for purpose is paramount for success so the correct features will be investigated as well.

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 5

The Partmaker story - Making any dental part you need and ISO Certified

Reliable engineering of simple or complex dental parts from implant screwdrivers to complex implant-retained bars is always a Godsend. Fresh from exhibiting at IDS 2023, Dr Chris Hart This lecture will discuss the journey has had from a hobbyist with a scanner and software to the owner of an ISO-certified manufacturing facility creating myriad unique dental parts for a variety of applications.

14.15 - 15.00 • Session 6

IMPLAGUIDE - An introduction to computerised implant planning, surgical guides and drill types

This discussion and software demonstration will cover the basics of implant planning software mentioning 3Shape Implant Studio; exoplan from exocad; and Blue Sky Plan software and others. Surgical guide design and drill types will be discussed. It is an ideal primer for those considering using guided surgery for implants. DICOM file importation, nerve tracing, virtual setup and implant positioning will all be covered. Some advanced topics such as protocols for full mouth treatment planning will also be discussed.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 7

Don't lose your data! A simple guide to computer servers and backups

Within the 3D dentistry world, data is the most valuable commodity - so protect it as if your life depended on it! This talk will cover computer basics, simple in-house servers, RAID arrays and other ways to manage and back up your data. Even if your computer knowledge is limited, this easy to follow talk will guide you through to a better understanding of what is available and what you can do today to simplify and secure your data workflow.

16.15 - 17.00 • Session 8

AORALSCAN 3 Wireless and MetiSmile facial scanner hands-on

This is a hands-on session with the new AORALSCAN 3 Wireless intraoral scanner and the new MetiSmile Facial scanner. Come along and try them out for yourself!

9.00 - 9.45 • Session 1

3D Printing Masterclass: Accuracy, settings, calibration , materials and supports plus bonus... New direct aligner printing

  • Lecture

3D Printing dental models is actually easy, however more complex parts such as crowns, denture bases, splints and surgical guides are more challenging. There is nothing worse than a print failure and there are many factors that can effect this. This presentation will discuss materials and methods of software manipulation and machine settings so you can optimise parts to get successful printing every time. Regardless of the printer you have or are thinking of purchasing, this is a not to be missed presentation. As a bonus, the new methods for direct aligner printing will be covered.

9.45 - 10.30 • Session 2

The printed restoration - is it the end of the milling era?

  • Lecture

It's time to get out your pitchforks and torches out as we dive head first into a hearty discussion on 3D printed restorations. Are these restorations strong enough for long-term use? Are printed restorations aesthetic enough for anterior use? Is that mill sitting in your practice going to end up as an expensive door stop?

In this topical lecture, Dr Andrew Ip will go through the current status of printable crown and bridge resins and discuss whether they have a place in an already saturated dental restorative materials market (hopefully without breaking too many hearts)!

10.30 - 11.00 • Morning Tea

11.00 - 11.45 • Session 3

Get the right training and support you need for your high tech digital products

  • Lecture

Training costs money and as we all are in the market for the best products at the lowest prices something has to give and it’s usually training and support that suffers. In this talk, Jeroen will discuss why it's important, especially when purchasing unfamiliar tech, to get correct initial training for you and your staff and why it's important to get ongoing support. Then he will reveal a new and unique way this can be done and delivered to you in the modern digital world.

11.45 - 12.30 • Session 4

Design and print an immediate denture now

  • Lecture

3D printing is fast offering solutions for creating dentures digitally. This talk will cover the scanning, preparation, designing and printing of a full immediate denture. Various different softwares will be discussed and an introduction to printable denture base materials and new tooth resins will be covered. Selection of the correct printer fit for purpose is paramount for success so the correct features will be investigated as well.

12.30 - 13.30 • Lunch

13.30 - 14.15 • Session 5

The Partmaker story - Making any dental part you need and ISO Certified

  • Lecture

Reliable engineering of simple or complex dental parts from implant screwdrivers to complex implant-retained bars is always a Godsend. Fresh from exhibiting at IDS 2023, Dr Chris Hart This lecture will discuss the journey has had from a hobbyist with a scanner and software to the owner of an ISO-certified manufacturing facility creating myriad unique dental parts for a variety of applications.

14.15 - 15.00 • Session 6

IMPLAGUIDE - An introduction to computerised implant planning, surgical guides and drill types

  • Lecture

This discussion and software demonstration will cover the basics of implant planning software mentioning 3Shape Implant Studio; exoplan from exocad; and Blue Sky Plan software and others. Surgical guide design and drill types will be discussed. It is an ideal primer for those considering using guided surgery for implants. DICOM file importation, nerve tracing, virtual setup and implant positioning will all be covered. Some advanced topics such as protocols for full mouth treatment planning will also be discussed.

15.00 - 15.30 • Afternoon Tea

15.30 - 16.15 • Session 7

Don't lose your data! A simple guide to computer servers and backups

  • Lecture

Within the 3D dentistry world, data is the most valuable commodity - so protect it as if your life depended on it! This talk will cover computer basics, simple in-house servers, RAID arrays and other ways to manage and back up your data. Even if your computer knowledge is limited, this easy to follow talk will guide you through to a better understanding of what is available and what you can do today to simplify and secure your data workflow.

16.15 - 17.00 • Session 8

AORALSCAN 3 Wireless and MetiSmile facial scanner hands-on

  • Hands-on Workshop

This is a hands-on session with the new AORALSCAN 3 Wireless intraoral scanner and the new MetiSmile Facial scanner. Come along and try them out for yourself!

9.45 - 10.30 • Session 1

Scanner Test Drive Workshop 1

Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

In conjunction with product specialists, you will get to try out:

  • RAYFace
  • MetiSmile
  • 3Shape TRIOS
  • iTero
  • DEXIS IS 3600
  • DEXIS IS 3700
  • DEXIS IS 3800W
  • Medit i700W
  • Shining 3D AOralScan3 Wireless
  • Planmeca Emerald
  • and more...

    10.30 - 11.00 • Morning Tea

    11.00 - 11.40 • Session 2

    Scanner Test Drive Workshop 2

    Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

    During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

    In conjunction with product specialists, you will get to try out:

    • RAYFace
    • MetiSmile
    • 3Shape TRIOS
    • iTero
    • DEXIS IS 3600
    • DEXIS IS 3700
    • DEXIS IS 3800W
    • Medit i700W
    • Shining 3D AOralScan3 Wireless
    • Planmeca Emerald
    • and more...

      11.50 - 12.30 • Session 3

      Scanner Test Drive Workshop 3

      Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

      During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

      In conjunction with product specialists, you will get to try out:

      • RAYFace
      • MetiSmile
      • 3Shape TRIOS
      • iTero
      • DEXIS IS 3600
      • DEXIS IS 3700
      • DEXIS IS 3800W
      • Medit i700W
      • Shining 3D AOralScan3 Wireless
      • Planmeca Emerald
      • and more...

        12.30 - 13.30 • Lunch

        13.30 - 14.10 • Session 4

        Characterising and finishing chairside crowns for predictable results

        Please visit the workshop registration desk to register for this workshop.

        In this workshop, technician and prosthetist Sam Dias will present a hands-on demonstration focussing on how to characterise and finish crowns milled chairside for predictable results. The session will include:

        • When to use Felspar, Hybrid or Glass blocks depending on the indication
        • Stain and Glaze technique for predictable results including a demonstration
        • How to polish in order to achieve the best results
        • Tips and tricks when polishing
        • How to achieve accurate shades in relation to your shade guide
        • Achieving the best results using VITA Akzent Plus Stain and Glaze

        The session will include a hands-on demo of:

        • Stain and glaze technique
        • Polishing Technique

        14.20 - 15.00 • Session 5

        Characterising and finishing chairside crowns for predictable results

        Please visit the workshop registration desk to register for this workshop.

        In this workshop, technician and prosthetist Sam Dias will present a hands-on demonstration focussing on how to characterise and finish crowns milled chairside for predictable results. The session will include:

        • When to use Felspar, Hybrid or Glass blocks depending on the indication
        • Stain and Glaze technique for predictable results including a demonstration
        • How to polish in order to achieve the best results
        • Tips and tricks when polishing
        • How to achieve accurate shades in relation to your shade guide
        • Achieving the best results using VITA Akzent Plus Stain and Glaze

        The session will include a hands-on demo of:

        • Stain and glaze technique
        • Polishing Technique

        15.00 - 15.30 • Afternoon Tea

        15.30 - 16.10 • Session 6

        Digital Shade Taking made easy with the Vita Easyshade Lite

        Please visit the workshop registration desk to register for this workshop.

        One of the most challenging things we do in our industry is to communicate and match shade. In this hands-on demonstration, Emad will discuss what influences and impacts our different interpretations of shade and colour and will demonstrate how the Vita Easyshade V plus the latest Vita Easyshade Lite launched at IDS 2023 in Germany in March resolves this challenge and enables a better communication of shade and therefore resulting in a better shade match for the patient.

        16.20 - 17.00 • Session 7

        Creating the inconspicuous denture with GC OPTIGLAZE

        Please visit the workshop registration desk to register for this workshop.

        This hands-on demonstration on using GC OPTIGLAZE will focus on creating characterization in both the pink and white of a prosthesis. It will include tips and tricks to achieve aesthetic results and a case-by-case discussion in the use of colours to match natural dentition.

        17.00 - 19.00 • Happy Hour Drinks

        9.45 - 10.30 • Session 1

        Scanner Test Drive Workshop 1

        • Hands-on Workshop
        • ONLY 20 Places

        Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

        During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

        In conjunction with product specialists, you will get to try out:

        • RAYFace
        • MetiSmile
        • 3Shape TRIOS
        • iTero
        • DEXIS IS 3600
        • DEXIS IS 3700
        • DEXIS IS 3800W
        • Medit i700W
        • Shining 3D AOralScan3 Wireless
        • Planmeca Emerald
        • and more...

        10.30 - 11.00 • Morning Tea

        11.00 - 11.40 • Session 2

        Scanner Test Drive Workshop 2

        • Hands-on Workshop
        • ONLY 20 Places

        Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

        During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

        In conjunction with product specialists, you will get to try out:

        • RAYFace
        • MetiSmile
        • 3Shape TRIOS
        • iTero
        • DEXIS IS 3600
        • DEXIS IS 3700
        • DEXIS IS 3800W
        • Medit i700W
        • Shining 3D AOralScan3 Wireless
        • Planmeca Emerald
        • and more...

        11.50 - 12.30 • Session 3

        Scanner Test Drive Workshop 3

        • Hands-on Workshop
        • ONLY 20 Places

        Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

        During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

        In conjunction with product specialists, you will get to try out:

        • RAYFace
        • MetiSmile
        • 3Shape TRIOS
        • iTero
        • DEXIS IS 3600
        • DEXIS IS 3700
        • DEXIS IS 3800W
        • Medit i700W
        • Shining 3D AOralScan3 Wireless
        • Planmeca Emerald
        • and more...

        12.30 - 13.30 • Lunch

        13.30 - 14.10 • Session 4

        Characterising and finishing chairside crowns for predictable results

        • Hands-on Workshop
        • ONLY 20 Places

        Please visit the workshop registration desk to register for this workshop.

        In this workshop, technician and prosthetist Sam Dias will present a hands-on demonstration focussing on how to characterise and finish crowns milled chairside for predictable results. The session will include:

        • When to use Felspar, Hybrid or Glass blocks depending on the indication
        • Stain and Glaze technique for predictable results including a demonstration
        • How to polish in order to achieve the best results
        • Tips and tricks when polishing
        • How to achieve accurate shades in relation to your shade guide
        • Achieving the best results using VITA Akzent Plus Stain and Glaze

        The session will include a hands-on demo of:

        • Stain and glaze technique
        • Polishing Technique

        14.20 - 15.00 • Session 5

        Characterising and finishing chairside crowns for predictable results

        • Hands-on Workshop
        • ONLY 20 Places

        Please visit the workshop registration desk to register for this workshop.

        In this workshop, technician and prosthetist Sam Dias will present a hands-on demonstration focussing on how to characterise and finish crowns milled chairside for predictable results. The session will include:

        • When to use Felspar, Hybrid or Glass blocks depending on the indication
        • Stain and Glaze technique for predictable results including a demonstration
        • How to polish in order to achieve the best results
        • Tips and tricks when polishing
        • How to achieve accurate shades in relation to your shade guide
        • Achieving the best results using VITA Akzent Plus Stain and Glaze

        The session will include a hands-on demo of:

        • Stain and glaze technique
        • Polishing Technique

        15.00 - 15.30 • Afternoon Tea

        15.30 - 16.10 • Session 6

        Digital Shade Taking made easy with the Vita Easyshade Lite

        • Hands-on Workshop
        • ONLY 20 Places

        Please visit the workshop registration desk to register for this workshop.

        One of the most challenging things we do in our industry is to communicate and match shade. In this hands-on demonstration, Emad will discuss what influences and impacts our different interpretations of shade and colour and will demonstrate how the Vita Easyshade V plus the latest Vita Easyshade Lite launched at IDS 2023 in Germany in March resolves this challenge and enables a better communication of shade and therefore resulting in a better shade match for the patient.

        16.20 - 17.00 • Session 7

        Creating the inconspicuous denture with GC OPTIGLAZE

        • Hands-on Workshop
        • ONLY 20 Places

        Please visit the workshop registration desk to register for this workshop.

        This hands-on demonstration on using GC OPTIGLAZE will focus on creating characterization in both the pink and white of a prosthesis. It will include tips and tricks to achieve aesthetic results and a case-by-case discussion in the use of colours to match natural dentition.

        17.00 - 19.00 • Happy Hour Drinks

        9.00 - 9.40 • Session 1

        Digital Shade Taking made easy with the Vita Easyshade Lite

        Please visit the workshop registration desk to register for this workshop.

        One of the most challenging things we do in our industry is to communicate and match shade. In this hands-on demonstration, Emad will discuss what influences and impacts our different interpretations of shade and colour and will demonstrate how the Vita Easyshade V plus the latest Vita Easyshade Lite launched at IDS 2023 in Germany in March resolves this challenge and enables a better communication of shade and therefore resulting in a better shade match for the patient.

        9.50 - 10.30 • Session 2

        • ,

        Kick Start Your Digital Design

        Please visit the workshop registration desk to register for this workshop.

        If you’re still sitting on the fence about digital dental technology, jump off and come to this workshop. The best way to learn new skills is often by doing them. This hands-on introduction to 3Shape Dental System will give the participants an insight as to just how easy the software guides you through the design process and how it can impact on your workflows. Engage in interactive experiences and build confidence that you can adapt your analogue skills into digital.

        10.30 - 11.00 • Morning Tea

        11.00 - 11.40 • Session 3

        Creating the inconspicuous denture with GC OPTIGLAZE

        Please visit the workshop registration desk to register for this workshop.

        This hands-on demonstration on using GC OPTIGLAZE will focus on creating characterization in both the pink and white of a prosthesis. It will include tips and tricks to achieve aesthetic results and a case-by-case discussion in the use of colours to match natural dentition.

        11.50 - 12.30 • Session 4

        Bringing CERASMART and TEMP PRINT to life with GC OPTIGLAZE

        Please visit the workshop registration desk to register for this workshop.

        This hands-on demonstration will show the process for creating lifelike TEMP Print temporary crowns and bridges. A demonstration of how the stains can change the chroma and how to add characteristics to individual milled crowns will be included as well as how to gett the most out of your GC OPTIGLAZE colour stains.

        12.30 - 13.30 • Lunch

        13.30 - 14.10 • Session 5

        Scanner Test Drive Workshop 4

        Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

        During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

        In conjunction with product specialists, you will get to try out:

        • RAYFace
        • MetiSmile
        • 3Shape TRIOS
        • iTero
        • DEXIS IS 3600
        • DEXIS IS 3700
        • DEXIS IS 3800W
        • Medit i700W
        • Shining 3D AOralScan3 Wireless
        • Planmeca Emerald
        • and more...

          14.20 - 15.00 • Session 6

          Scanner Test Drive Workshop 5

          Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

          During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

          In conjunction with product specialists, you will get to try out:

          • RAYFace
          • MetiSmile
          • 3Shape TRIOS
          • iTero
          • DEXIS IS 3600
          • DEXIS IS 3700
          • DEXIS IS 3800W
          • Medit i700W
          • Shining 3D AOralScan3 Wireless
          • Planmeca Emerald
          • and more...

            15.00 - 15.30 • Afternoon Tea

            15.30 - 16.10 • Session 7

            Scanner Test Drive Workshop 6

            Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

            During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

            In conjunction with product specialists, you will get to try out:

            • RAYFace
            • MetiSmile
            • 3Shape TRIOS
            • iTero
            • DEXIS IS 3600
            • DEXIS IS 3700
            • DEXIS IS 3800W
            • Medit i700W
            • Shining 3D AOralScan3 Wireless
            • Planmeca Emerald
            • and more...

              16.20 - 17.00 • Session 8

              Scanner Test Drive Workshop 7

              Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

              During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

              In conjunction with product specialists, you will get to try out:

              • RAYFace
              • MetiSmile
              • 3Shape TRIOS
              • iTero
              • DEXIS IS 3600
              • DEXIS IS 3700
              • DEXIS IS 3800W
              • Medit i700W
              • Shining 3D AOralScan3 Wireless
              • Planmeca Emerald
              • and more...

                9.00 - 9.40 • Session 1

                Digital Shade Taking made easy with the Vita Easyshade Lite

                • Hands-on Workshop
                • ONLY 20 Places

                Please visit the workshop registration desk to register for this workshop.

                One of the most challenging things we do in our industry is to communicate and match shade. In this hands-on demonstration, Emad will discuss what influences and impacts our different interpretations of shade and colour and will demonstrate how the Vita Easyshade V plus the latest Vita Easyshade Lite launched at IDS 2023 in Germany in March resolves this challenge and enables a better communication of shade and therefore resulting in a better shade match for the patient.

                9.50 - 10.30 • Session 2

                • ,

                Kick Start Your Digital Design

                • Hands-on Workshop
                • ONLY 20 Places

                Please visit the workshop registration desk to register for this workshop.

                If you’re still sitting on the fence about digital dental technology, jump off and come to this workshop. The best way to learn new skills is often by doing them. This hands-on introduction to 3Shape Dental System will give the participants an insight as to just how easy the software guides you through the design process and how it can impact on your workflows. Engage in interactive experiences and build confidence that you can adapt your analogue skills into digital.

                10.30 - 11.00 • Morning Tea

                11.00 - 11.40 • Session 3

                Creating the inconspicuous denture with GC OPTIGLAZE

                • Hands-on Workshop
                • ONLY 20 Places

                Please visit the workshop registration desk to register for this workshop.

                This hands-on demonstration on using GC OPTIGLAZE will focus on creating characterization in both the pink and white of a prosthesis. It will include tips and tricks to achieve aesthetic results and a case-by-case discussion in the use of colours to match natural dentition.

                11.50 - 12.30 • Session 4

                Bringing CERASMART and TEMP PRINT to life with GC OPTIGLAZE

                • Hands-on Workshop
                • ONLY 20 Places

                Please visit the workshop registration desk to register for this workshop.

                This hands-on demonstration will show the process for creating lifelike TEMP Print temporary crowns and bridges. A demonstration of how the stains can change the chroma and how to add characteristics to individual milled crowns will be included as well as how to gett the most out of your GC OPTIGLAZE colour stains.

                12.30 - 13.30 • Lunch

                13.30 - 14.10 • Session 5

                Scanner Test Drive Workshop 4

                • Hands-on Workshop
                • ONLY 20 Places

                Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

                During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

                In conjunction with product specialists, you will get to try out:

                • RAYFace
                • MetiSmile
                • 3Shape TRIOS
                • iTero
                • DEXIS IS 3600
                • DEXIS IS 3700
                • DEXIS IS 3800W
                • Medit i700W
                • Shining 3D AOralScan3 Wireless
                • Planmeca Emerald
                • and more...

                14.20 - 15.00 • Session 6

                Scanner Test Drive Workshop 5

                • Hands-on Workshop
                • ONLY 20 Places

                Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

                During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

                In conjunction with product specialists, you will get to try out:

                • RAYFace
                • MetiSmile
                • 3Shape TRIOS
                • iTero
                • DEXIS IS 3600
                • DEXIS IS 3700
                • DEXIS IS 3800W
                • Medit i700W
                • Shining 3D AOralScan3 Wireless
                • Planmeca Emerald
                • and more...

                15.00 - 15.30 • Afternoon Tea

                15.30 - 16.10 • Session 7

                Scanner Test Drive Workshop 6

                • Hands-on Workshop
                • ONLY 20 Places

                Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

                During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

                In conjunction with product specialists, you will get to try out:

                • RAYFace
                • MetiSmile
                • 3Shape TRIOS
                • iTero
                • DEXIS IS 3600
                • DEXIS IS 3700
                • DEXIS IS 3800W
                • Medit i700W
                • Shining 3D AOralScan3 Wireless
                • Planmeca Emerald
                • and more...

                16.20 - 17.00 • Session 8

                Scanner Test Drive Workshop 7

                • Hands-on Workshop
                • ONLY 20 Places

                Please visit the workshop registration desk to register for any of the Scanner Test Drive Workshops.

                During this interactive workshop, you'll get to try out all the latest INTRAORAL scanners and FACIAL scanners. Limited to 20 participants, you will be able to try scanning on patients, models and phantom heads to gain a better understanding of digital impression taking and facial scanning to help determine the best solution for your practice.

                In conjunction with product specialists, you will get to try out:

                • RAYFace
                • MetiSmile
                • 3Shape TRIOS
                • iTero
                • DEXIS IS 3600
                • DEXIS IS 3700
                • DEXIS IS 3800W
                • Medit i700W
                • Shining 3D AOralScan3 Wireless
                • Planmeca Emerald
                • and more...
                More info

                Mr Sam Dias

                Adv.Dip.Dent.Pros, Dip.Dent.Tech

                Sam Dias has been working within the Dental Laboratory field since the early 1990s. In 2005, he completed his Dental Technology Diploma and in 2008 he opened and ran a fully functional Dental Labor...

                More info

                Dr Ahmad H Al-Hassiny

                BDS (Otago)

                Dr Ahmad Al-Hassiny is a global leader in digital dentistry and intraoral scanners, carrying out lectures as a KOL for multiple leading companies. He is one of the few in the world who owns and has...

                More info

                Mr Jeroen Klijnsma

                MDT

                Jeroen is a European trained Dental Technician, Digital Specialist and global speaker with extensive experience in Laboratory and 3D manufacturing, printing, milling and digital workflows. Collabor...

                More info

                Mr Terry Whitty

                Dip.DT (Syd)

                With nearly 25 years of experience in digital dentistry, Terence “Terry” Whitty is a well-known dental technology key opinion leader, consultant and author. Bringing over 40 years of experience...

                More info

                Mr Angus Pryor

                MBA (Marketing)

                Multi-award-winning Practice Growth Specialist, Angus Pryor, is an author, marketer, and international speaker. He is the number one Google-ranked dental marketer in Australia.

                In 2023, Angu...

                More info

                Mr Cristian Petri

                Cristian Petri has had an accomplished and dynamic career spanning over twenty years. After finishing his studies in 1999 he worked as a dental technician in Romania, USA and Germany until he opene...

                More info

                Mr Greg Baker

                Greg Baker is a qualified dental technician and the owner of K-Lab Digital Solutions, a company which he founded in order to provide the highest possible level of technical support and service to h...

                More info

                Dr Lawrence TL Lau

                BDS (Hons) (Syd)

                Lawrence Lau graduated from the University of Sydney in 1997 with Honours and was the recipient of Prosthetic prize. He has been in private practice since 1999 and operates 3 practices in the Sydne...

                More info

                Mr Jim M Ruddy

                Jim Ruddy has over 25 years’ experience in the field of dental ceramics; both lecturing and teaching across Australia, New Zealand and Europe.

                Jim was a trainer for three years in Germany ...

                More info

                Dr Murray SA Orr

                BOH (DentSci), Grad.Dip.Dent (Griffith)

                Curious about all things innovative, Dr Murray Orr owns a practice in a boutique dental clinic in Burleigh Heads on the Gold Coast where he practices alongside 6 other clinicians. Advanced Laser an...

                More info

                Mr Yahya Karim

                Yahya Karim was born in Oslo Norway and then moved to London England. He immigrated to Australia in his late teens and studied to become a dental technician.

                His keen interest in computers h...

                More info

                Ms Belinda Muggleton

                Belinda Muggleton is the CEO of Dental Axess, a leading facilitator of digital dentistry solutions in Australia, New Zealand, Europe and North America. Ms Muggleton initially trained as a dental te...

                More info

                Dr Christopher N Hart

                BDSc (Melb), MDSc (Melb)

                Chris Hart is a registered Prosthodontist with a special interest in the area of dental implant components. He operates a private dental practice and an engineering business providing custom dental...

                More info

                Mr Justin Elsey

                Justin Elsey is the founder and managing director of Asiga, which designs and manufactures 3D printers and resins in Sydney, Australia and exports globally. He is interested in 3D printing technolo...

                More info

                Mr Joseph Tavella

                Joseph Tavella is an experienced Australian Dental Technician with 15 years in the industry. Specializing in CAD/CAM technology, he has received extensive digital training in Australia, Japan, Denm...

                More info

                Mr Craig Davidson

                Craig Davidson is the DGSHAPE Business Development Manager – Oceania - for Roland DG Australia.

                Craig has over 20 years of experience in the Dental Industry. Craig’s broad knowledge of D...

                More info

                Ms Naomi Stojoski

                Ortho System Specialist. Training & Application Specialist at 3Shape Oceania.

                Naomi's career in the dental industry began as a dental assistant and through the years she has progressed in varying roles and gained valuable experience in sales, training and team management. Du...

                More info

                Mr Michael Teiniker

                Michael Teiniker, founder of Blenderfordental software, has a wealth of knowledge in the dental industry. He graduated in South Africa in 1989 at the Witwatersrand Technical Institute with a Nation...

                More info

                Mr Charlie Anderson

                Charlie Anderson is a director of Australian 3D printing resin manufacturer Monocure 3D.

                In a previous life, Charlie worked in the TV industry in Australia and abroad for over 20 years. He s...

                More info

                Dr Jack B Milgate

                BHSc (Dent), MDent

                Jack is an accomplished dentist originally from country Victoria (Echuca-Moama) and is excited to formalise his dream of opening his own clinic in a place he loves.

                As one of the leading gen...

                More info

                Dr Andrew H Ip

                BDS (Adel), MRACDS (GDP), Grad.Dip.Ortho (JCU), MSc Implantology (IMC), PGrad.Dip Digital Dentistry (IDDA)

                Dr Andrew Ip is a Sydney-based private general dentist who has presented on 3D printing in a dental practice on multiple occasions. He achieved Membership in General Dental Practice with the Royal ...

                More info

                Dr Tom Shao

                BOH (DentSci), Grad.Dip.Dent (Griffith)

                Dr Tom Shao is a leading cosmetic and reconstructive dentist based on the Gold Coast, AUS. Dr Tom is also an expert in the field of 3D printing in dentistry. He is famous for the highly successful ...

                More info

                Ms Judith Zwenger

                Starting with Amann Girrbach as a sales representative in 1995 Judith Zwenger knows Amann Girrbach Company and product offering like the back of her hand. She is currently the Regional Director of ...

                More info

                Mr Tommy Boutros

                Founder and director of Innovatio Dental Supplies Tommy Boutros started the company in 2013 with Amann Girrbach as his first partner as an exclusive distributor of Amann Girrbach in Australia. Afte...

                More info

                Mr Emad Mardli

                Emad Mardli is currently representing VITA Zahnfabrik in Australia and New Zealand and has done for the past 4 years. Apart from being a qualified Dental Technician, Emad worked as the National Man...

                More info

                Dr Andrea Shepperson

                BDS (Otago)

                Dr Andrea Shepperson is one of New Zealand’s best-known dentists and educators, with a referral-based clinical practice managing tooth wear and interdisciplinary reconstruction of the worn dentit...

                More info

                Dr Cecilia So

                BDS Hons (Syd), MFDS (London), Grad.Dip.Clin.Dent (Oral Implants) (Syd), FICD, FPFA

                Dr Cecilia So is a dentist with practice limited to surgical dentistry and oral implant. After completing an undergraduate Bachelor of Dental Surgery (Hons) degree at the University of Sydney in 20...

                More info

                Dr Robert E Ashman

                BDS (Otago)

                Everyday Dr Rob Ashman renews youth and beauty at his leading Aesthetic Dental Practice in Christchurch New Zealand. He is an international speaker, author and educator in Cosmetic Dentistry, Chair...

                More info

                Dr Joseph W Alphonse

                BSc (Pharm) (Syd), BDent (Syd)

                Dr Joe Alphonse is a general dentist practising in Sydney, Australia. He graduated with a Bachelor of Dentistry from the University of Sydney and has completed comprehensive further education in Or...

                More info

                Dr Dimosthenis Mantokoudis

                PhD

                Dimosthenis Mantokoudis graduated at University of Berne, Switzerland in dentistry and continued with his PHD in periodontology. After completing the postgraduate program in prosthodontics, he was ...

                More info

                Dr Marc S Nalder

                BDSc (WA), PGDip Dig Ortho (UK), PGDip Ortho Dentofac Orthopaed (UK), GradDip Dig Ortho Treat (AU)

                Marc is a general dentist who runs a busy private practice in Perth and focuses his treatment on orthodontics only. He graduated from the University of Western Australia and has a Postgraduate Dipl...

                More info

                Dr Michael B Lewis

                BDS Hons (Syd), DClinDent (Pros) (Syd), MRACDS (Pros), FPFA, FICD

                Michael Lewis registered as a general dentist in 2003 graduating with honours and then completed his Doctorate of Clinical Dentistry in Prosthodontics at the University of Sydney in 2010. He is the...

                More info

                Mr Mario Aparicio

                Mario Aparicio is the Managing Director at APAC Digital Dentistry & Laboratory. He studied Dental Technology in Brisbane and worked at Ancona Dental as the Lab Manager. He later worked as a regiona...

                More info

                Mr Simon J Ashworth

                Simon Ashworth is an accomplished clinical dental technician with nearly 40 years’ experience. He has studied extensively in the fields of both fixed and removable prosthetics and is a passionate...

                More info

                Mr Sergio Polisi

                Sergio Polisi is an Italian dental technician with extensive experience in advanced CAD/CAM and aestethic rehabilitations. He is a technical specialist with more then 12 years of experience in full...

                More info

                Mr David S Smith

                Graduating as a Dental Technician in 1986, then as a Dental Prosthetist in 1993, David’s fascination for Dental Prosthetics has fuelled his desire to keep advancing his skills, travelling nationa...

                More info

                Mr Mauritz Slabbert

                DTech Registration Exam, DipDentTech

                Mauritz Slabbert is the owner of ProCast Dental Laboratory in Silverdale, Auckland. He qualified as a Dental Technician at the Cape Peninsula University of Technology during the nineties and in his...

                More info

                A/Prof Max Guazzato

                PhD, DDS (Hons 1 (Milan), DClinDent (Pros), FRACDS, MRACDS, FPFA, FICD, DT, A/Professor of Oral Rehabilitation University of Sydney

                A/Prof. Max Guazzato grew up in Milan, Italy where he completed a Dental Technician diploma and graduated from the University of Milan with a Bachelor Degree in Dentistry with Honours. To further h...

                More info

                Mr Doug Stuart

                Dental Technician & Senior Digital Advisor.

                Doug Stuart is a highly experienced Dental Technician with over 22 years at Ivoclar, specializing in digital workflows and software solutions. Originally from the UK, Doug transitioned from working...

                More info

                Dr David R Moffet

                BDS (Syd), FPFA, CSP

                Dr David Moffet is a dentist graduate from Sydney University and the author of the #1 Amazon Bestseller “How to Build the Dental Practice of Your Dreams (without killing yourself) in Less than Si...

                More info

                Mr Rainer Wöran

                MDT

                Rainer Woeran MDT started his dental technology apprenticeship in 1997 at Vienna’s renown Wipla Laboratories. After finishing this with outstanding recognition, he moved on to experience the dive...

                More info

                Mr Jason R Petley

                Jason is a Dental Prosthetist in Far North Queensland. He graduated with a Bachelor of Dental Prosthetics in 2019. Jason has a background in Information Technology and art, having studied IT at Bon...

                More info

                Mr Joseph Davies

                Appointed the CEO of the TRI Australia and New Zealand distribution company TRI Dental ANZ in January 2023. Previously held General Manager position for TRI Dental Implants Australia since 2016.

                More info

                Mr Hiro Takahashi

                Hiro Takahashi is the Japan and Australia Sales Manager of Heygears, IMC Inc., an innovative company devoted to providing digital manufacturing solutions across various industries and focused on 3D...

                More info

                Mr Andrew J Harris

                Andrew Harris is a Brisbane-based Dental Prosthetist with over 40 year’s experience in the dental industry and has owned his own full-service laboratory and clinical practice for over 30 years. <...

                More info

                Mr Ben Jones

                Ben Jones is a practising dental prosthetist with a successful practice in Sunbury, Victoria. He graduated in 2014 as technician and 2017 as a prosthetist from RMIT. Ben also works as a digital app...

                Cancellation Policy

                Full refund up to 30 days before course date.

                No refund within 30 days of course date.

                Payment Options:
                CONCLUDED

                Digital Dentistry Stream - 2 Days

                THIS RATE APPLIES TO: Dentists, Others

                CONCLUDED
                • Full Program
                • AUD 880.00
                • Including 10% GST
                • Early Bird Discount
                • Less AUD 220.00
                • Expired
                •  
                •  
                •  
                •  
                •  
                •  
                CONCLUDED

                Dental Technology Stream - 2 Days

                THIS RATE APPLIES TO: Dental Prosthetists, Clinical Dental Technicians, Denturists, Dental Technicians, Others

                CONCLUDED
                • Full Program
                • AUD 880.00
                • Including 10% GST
                • Early Bird Discount
                • Less AUD 220.00
                • Expired
                •  
                •  
                •  
                •  
                •  
                •  
                CONCLUDED

                Friday Only

                CONCLUDED
                • Full Program
                • AUD 440.00
                • Including 10% GST
                •  
                •  
                •  
                •  
                •  
                •  
                •  
                •  
                •  
                CONCLUDED

                Saturday Only

                CONCLUDED
                • Full Program
                • AUD 440.00
                • Including 10% GST
                •  
                •  
                •  
                •  
                •  
                •  
                •  
                •  
                •